Machine Check Exception - bluesmoke.c dump in 2.2.17

From: Gerhard Esterhuizen (goof@dsp.sun.ac.za)
Date: Tue Dec 05 2000 - 08:26:01 EST


Hi,

I noticed some MCE dumps getting mailed to the list in September. From
Alan Cox's comments I gathered that he was looking for similar dumps [at
least then]. My workstation produced one yesterday and I hope this is
still relevant info. This machine has seen some moderate to heavy use for
a few months now and this is the first time this [MCE] has happened. We
have, however, experienced two spontaneous and unexplained reboots.

I am not subscribed to the list, so send me a personal mail if you require
more information [ I'll check the list regularly though ]. The kernel is
an out-of-the-box 2.2.17. I also note that the other people normally
include register dumps. Mine didn't produce any of that, just the MCE
line.

Thanks,
        gerhard

Here are the details:

    -- from /var/log/messages [and also sprayed all over the terms]

Dec 4 13:33:15 pamela kernel: CPU 0: Machine Check Exception: 0000000400000000<0>Bank 4: b200000000040151general protection fault: 0000
Dec 4 13:33:15 pamela kernel: CPU: 0

   -- /var/log/dmesg

Linux version 2.2.17 (root@pamela.dsp.sun.ac.za) (gcc version 2.95.2
19991024 (release)) #4 SMP Fri Nov 3 17:47:06 SAST 2000
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 698141 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1392.64 BogoMIPS
Memory: 517128k/524224k available (1176k kernel code, 420k reserved, 5444k
data, 56k init)
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU serial number disabled.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
per-CPU timeslice cutoff: 49.95 usecs.
CPU0: Intel Pentium III (Coppermine) stepping 03
calibrating APIC timer ...
..... CPU clock speed is 698.1326 MHz.
..... system bus clock speed is 99.7331 MHz.
Booting processor 1 eip 2000
Calibrating delay loop... 1395.92 BogoMIPS
CPU serial number disabled.
Intel machine check reporting enabled on CPU#1.
OK.
CPU1: Intel Pentium III (Coppermine) stepping 03
Total of 2 processors activated (2788.56 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23 not connected.
number of MP IRQ sources: 25.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
 00 000 00 1 0 0 0 0 0 0 00
 01 000 00 0 0 0 0 0 1 1 59
 02 0FF 0F 0 0 0 0 0 1 1 51
 03 000 00 0 0 0 0 0 1 1 61
 04 000 00 0 0 0 0 0 1 1 69
 05 000 00 0 0 0 0 0 1 1 71
 06 000 00 0 0 0 0 0 1 1 79
 07 000 00 0 0 0 0 0 1 1 81
 08 000 00 0 0 0 0 0 1 1 89
 09 000 00 0 0 0 0 0 1 1 91
 0a 000 00 0 0 0 0 0 1 1 99
 0b 000 00 0 0 0 0 0 1 1 A1
 0c 000 00 0 0 0 0 0 1 1 A9
 0d 000 00 1 0 0 0 0 0 0 00
 0e 000 00 0 0 0 0 0 1 1 B1
 0f 000 00 0 0 0 0 0 1 1 B9
 10 0FF 0F 1 1 0 1 0 1 1 C1
 11 0FF 0F 1 1 0 1 0 1 1 C9
 12 0FF 0F 1 1 0 1 0 1 1 D1
 13 0FF 0F 1 1 0 1 0 1 1 D9
 14 000 00 1 0 0 0 0 0 0 00
 15 000 00 1 0 0 0 0 0 0 00
 16 000 00 1 0 0 0 0 0 0 00
 17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 10
IRQ11 -> 11
IRQ12 -> 12
IRQ13 -> 13
IRQ14 -> 14
IRQ15 -> 15
IRQ16 -> 16
IRQ17 -> 17
IRQ18 -> 18
IRQ19 -> 19
.................................... done.
checking TSC synchronization across CPUs: passed.
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xfb150
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI->APIC IRQ transform: (B0,I9,P0) -> 17
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I10,P0) -> 18
PCI->APIC IRQ transform: (B0,I11,P0) -> 19
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
RAM disk driver initialized: 16 RAM disks of 4096K size
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hdd: ATAPI CDROM 52X, ATAPI CDROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hdd: ATAPI 52X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 392 instructions downloaded
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 0/12/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 392 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
       <Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.31/3.2.4
       <Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi : 2 hosts.
(scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 31.
  Vendor: SEAGATE Model: ST318436LW Rev: 0010
  Type: Direct-Access ANSI SCSI revision: 03
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 35885168 [17522 MB]
[17.5 GB]
rtl8139.c:v1.07 5/6/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html
eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xd800, IRQ 19,
00:10:b5:54:2a:1c.
Partition check:
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14
sda15 > sda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 56k freed
Adding Swap: 128480k swap-space (priority -1)
Adding Swap: 128480k swap-space (priority -2)
Adding Swap: 128480k swap-space (priority -3)
Adding Swap: 128480k swap-space (priority -4)
Adding Swap: 128480k swap-space (priority -5)
Adding Swap: 128480k swap-space (priority -6)
Adding Swap: 128480k swap-space (priority -7)
Adding Swap: 128480k swap-space (priority -8)
es1371: version v0.22 time 17:50:35 Nov 3 2000
es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08
es1371: found es1371 rev 8 at io 0xd400 irq 17
es1371: features: joystick 0x0
es1371: codec vendor CRY (0x435259) revision 19 (0x13)
es1371: codec features Headphone out 20bit DAC 18bit ADC
es1371: stereo enhancement: Crystal Semiconductor 3D Stereo Enhancement

-- 

Gerhard Esterhuizen

Digital Signal Processing Group Department of Electrical & Electronic Engineering University of Stellenbosch South Africa

Tel.: +27 21 808 4315 Fax: +27 21 808 4981 Home: +27 21 887 4962 mailto:gesterhuizen@bigfoot.com http://www.flatfoot.co.za/gerhard

"You will never be happy if you continue to search for what happiness consists of. You will never live if you are looking for the meaning of life." --Albert Camus (1913 - 1960)

"What do you despise? By this are you truly known." --from "Manual of Muad'Dib" by the Princess Irulan

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Dec 07 2000 - 21:00:13 EST