CPU0: Intel Pentium III (Coppermine) stepping 03 calibrating APIC timer ... ..... CPU clock speed is 799.6236 MHz. ..... system bus clock speed is 133.2705 MHz. Booting processor 1 eip 2000 Calibrating delay loop... 1599.08 BogoMIPS Pentium-III serial number disabled. OK. CPU1: Intel Pentium III (Coppermine) stepping 03 Total of 2 processors activated (3194.88 BogoMIPS). enabling symmetric IO mode... ...done. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23 not connected. number of MP IRQ sources: 23. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : IO APIC version: 0020 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.rutgers.edu .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 0 0 0 0 0 1 1 59 02 0FF 0F 0 0 0 0 0 1 1 51 03 000 00 0 0 0 0 0 1 1 61 04 000 00 0 0 0 0 0 1 1 69 05 000 00 0 0 0 0 0 1 1 71 06 000 00 0 0 0 0 0 1 1 79 07 000 00 0 0 0 0 0 1 1 81 08 000 00 0 0 0 0 0 1 1 89 09 000 00 0 0 0 0 0 1 1 91 0a 000 00 0 0 0 0 0 1 1 99 0b 000 00 0 0 0 0 0 1 1 A1 0c 000 00 0 0 0 0 0 1 1 A9 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 0 0 0 0 0 1 1 B1 0f 000 00 0 0 0 0 0 1 1 B9 10 0FF 0F 1 1 0 1 0 1 1 C1 11 0FF 0F 1 1 0 1 0 1 1 C9 12 0FF 0F 1 1 0 1 0 1 1 D1 13 0FF 0F 1 1 0 1 0 1 1 D9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : IO APIC version: 0020 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.rutgers.edu WARNING: unexpected IO-APIC, please mail to linux-smp@vger.rutgers.edu .... register #02: 0F000000 ....... : arbitration: 0F .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 2 IRQ1 -> 1 IRQ3 -> 3 IRQ4 -> 4 IRQ5 -> 5 IRQ6 -> 6 IRQ7 -> 7 IRQ8 -> 8 IRQ9 -> 9 IRQ10 -> 10 IRQ11 -> 11 IRQ12 -> 12 IRQ13 -> 13 IRQ14 -> 14 IRQ15 -> 15 IRQ16 -> 16 IRQ17 -> 17 IRQ18 -> 18 IRQ19 -> 19 .................................... done. checking TSC synchronization across CPUs: passed. PCI: PCI BIOS revision 2.10 entry at 0xfdb91 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI->APIC IRQ transform: (B0,I31,P3) -> 19 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B4,I0,P0) -> 16 PCI->APIC IRQ transform: (B1,I6,P0) -> 18 PCI->APIC IRQ transform: (B1,I8,P0) -> 16 Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 524288 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13) apm: disabled - APM is not SMP safe. Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 54098U8, ATA DISK drive hdb: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive hdc: 0125, ATAPI CDROM drive hdd: Hewlett-Packard CD-Writer Plus 9100, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: Maxtor 54098U8, 39082MB w/2048kB Cache, CHS=4982/255/63 hdc: ATAPI DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.10 hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 1792.986 MB/sec p5_mmx : 1872.234 MB/sec 8regs : 1374.648 MB/sec 32regs : 808.101 MB/sec using fastest function: p5_mmx (1872.234 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 > RAMDISK: Compressed image found at block 0 autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem). eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:30:48:21:03:90, IRQ 16. Receiver lock-up bug exists -- enabling work-around. Board assembly 000d80-134, Physical connectors present: Primary interface chip None PHY #0. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Receiver lock-up workaround activated. autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 76k freed Adding Swap: 1052216k swap-space (priority -1) Creative SBLive! at 0xaf80 on irq 18