Re: Dell Precision 330 (Pentium 4, i850 chipset, 3c905c)

From: I Lee Hetherington (ilh@sls.lcs.mit.edu)
Date: Fri Jan 05 2001 - 09:59:39 EST


Andrew Morton wrote:

> Please do. The boot-time messages which come out of the driver
> would be interesting. It would help if you add `debug=7' to
> the 3c59x modprobe command line also.

OK. I've included dmesg output due to modprobe with debug=7 followed by ifup
(using pump -- problems persist with static IP as well), cat /proc/interrupts
showing no eth0, and ifconfig eth0.

Please let me know what else I can provide to help out.

--Lee Hetherington

3c59x.c 15Sep00 Donald Becker and others http://www.scyld.com/network/vortex.html
eth0: 3Com 3c905C Tornado at 0xe880, 00:b0:d0:14:d2:b4, IRQ 11
  Internal config register is 1800000, transceivers 0xa.
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 1, status 24.
  MII transceiver found at address 2, status 24.
  Enabling bus-master transmits and whole-frame receives.
eth0: Initial media type Autonegotiate.
eth0: MII #1 status 0024, link partner capability 41e1, setting full-duplex.
eth0: vortex_open() InternalConfig 01800000.
eth0: vortex_open() irq 11 media status 8080.
eth0: Filling in the Rx ring.
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: Trying to send a boomerang packet, Tx index 0.
eth0: interrupt, status f201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status f201.
eth0: exiting interrupt, status f000.
eth0: Media selection timer tick happened, Autonegotiate.
eth0: MII transceiver has status 0020.
eth0: Media selection timer finished, Autonegotiate.
eth0: Trying to send a boomerang packet, Tx index 1.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: Trying to send a boomerang packet, Tx index 2.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 3.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 4.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 5.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 6.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 7.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 8.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 9.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 10.
eth0: interrupt, status e201, latency 2, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: vortex_close() status e000, Tx status 00.
eth0: vortex close stats: rx_nocopy 0 rx_copy 0 tx_queued 11 Rx pre-checksummed 0.
eth0: Initial media type Autonegotiate.
eth0: MII #1 status 0020, link partner capability 41e1, setting full-duplex.
eth0: vortex_open() InternalConfig 01800000.
eth0: vortex_open() irq 11 media status 8080.
eth0: Filling in the Rx ring.
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: Trying to send a boomerang packet, Tx index 0.
eth0: interrupt, status f201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status f201.
eth0: exiting interrupt, status f000.
eth0: Media selection timer tick happened, Autonegotiate.
eth0: MII transceiver has status 0020.
eth0: Media selection timer finished, Autonegotiate.
eth0: Trying to send a boomerang packet, Tx index 1.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: no boomerang interrupt pending
eth0: no boomerang interrupt pending
eth0: Trying to send a boomerang packet, Tx index 2.
eth0: interrupt, status e201, latency 2, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 3.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 4.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 5.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 6.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 7.
eth0: interrupt, status e201, latency 2, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 8.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 9.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: Trying to send a boomerang packet, Tx index 10.
eth0: interrupt, status e201, latency 3, cur_rx 0, dirty_rx 0
eth0: In interrupt loop, status e201.
eth0: exiting interrupt, status e000.
eth0: vortex_close() status e000, Tx status 00.
eth0: vortex close stats: rx_nocopy 0 rx_copy 0 tx_queued 22 Rx pre-checksummed 0.


           CPU0
  0: 20048 XT-PIC timer
  1: 314 XT-PIC keyboard
  2: 0 XT-PIC cascade
  8: 1 XT-PIC rtc
 11: 1660 XT-PIC aic7xxx
 12: 0 XT-PIC PS/2 Mouse
 13: 1 XT-PIC fpu
 15: 7 XT-PIC ide1
NMI: 0

eth0 Link encap:Ethernet HWaddr 00:B0:D0:14:D2:B4
          BROADCAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:1 frame:0
          TX packets:23 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:100
          Interrupt:11 Base address:0xe880

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jan 07 2001 - 21:00:22 EST