Re: Related VIA PCI crazyness?

From: Adrian Bunk (bunk@fs.tum.de)
Date: Sun Jan 07 2001 - 09:33:42 EST


On Sun, 7 Jan 2001, Philip Armstrong wrote:

> In supplement to Evan Thompson's emails with the subject "Additional
> info. for PCI VIA IDE crazyness. Please read." I've noticed the
> following message with recent 2.4.0 test + release kernels:
>
> IRQ routing conflict in pirq table! Try 'pci=autoirq'
>...
> and the output of lspci is:
>
> 00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 03)
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 41)
> 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
> 00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 02)
> 00:07.3 Bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10)
> 00:08.0 SCSI storage controller: Advanced System Products, Inc ABP940-U / ABP960-U (rev 03)
> 00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
>...

I have exactly the same board and the same symptoms: I have a Realtek
Semiconductor Co., Ltd. RTL-8029(AS) (using the NE2000-PCI driver). I
always get the 'pci=autoirq' error message from the card when booting but
it took some time until I noticed it because the card works without any
problems. I get the same error message in 2.4.0-ac1 with the VIA IDE
driver upgraded to v3.6 . I don't have module support in my kernels.

> HTH someone.
>
> cheers,
>
> Phil Armstrong

cu,
Adrian

-- 
A "No" uttered from deepest conviction is better and greater than a
"Yes" merely uttered to please, or what is worse, to avoid trouble.
                -- Mahatma Ghandi

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Jan 07 2001 - 21:00:28 EST