On Sun, 14 Jan 2001, Mike A. Harris wrote:
> Becker's latest via-rhine driver ontop 2.2.18..
>
> ...
> eth1: Transmit timed out, status 0000, PHY status 0000,
> resetting...
[snip]
> Keeps going nonstop until I ifdown eth1.
>
> Card worked fine 2 days ago...
So what did you change?
Has the machine been up since then?
Someone else with the same symptoms (in 2.4)
http://www.uwsg.iu.edu/hypermail/linux/net/0011.0/0027.html
Becker's reply
http://www.uwsg.iu.edu/hypermail/linux/net/0011.0/0032.html
"Try unplugging the system and doing a really cold boot. A soft-off does
not reset the chip.
If this solves the problem, we will have to add code to re-load the
EEPROM info into the chip."
There is no further reply in that thread.
/Urban
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Jan 15 2001 - 21:00:38 EST