(Please Cc: me for replies, as I'm currently not subscribed. Thanks.)
Hello,
with 2.4.0 I get lots of
kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
kernel: hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
errors. I already got those errors with the -test series.
The current 2.2.x kernels (2.2.18/2.2.19p7) do not show this
behaviour.
It's a VIA motherboard with the following IDE config:
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide0: VIA Bus-Master (U)DMA Timing Config Success
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
ide1: VIA Bus-Master (U)DMA Timing Config Success
hda: IBM-DJNA-351520, ATA DISK drive
hdb: NEC CD-ROM DRIVE:282, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DJNA-351520, 14664MB w/430kB Cache, CHS=1869/255/63
Any hint what I can do about this? I use simply
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_DMA_NONPCI is not set
CONFIG_BLK_DEV_IDE_MODES=y
in my .config.
Thanks!
Ulf
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jan 23 2001 - 21:00:25 EST