On Wed, Jan 24, 2001 at 11:17:45PM +0100, f5ibh wrote:
> > It looks like that there is some problem with screen offset computation then.
> > Can you try 'video=matrox:cross4MB' instead of '...:nopan'? I did not
>
> video=matrox:cross4MB works too !
>
Hi Linus,
can you apply following patch to 2.4.1-pre10? It does touch matroxfb only:
(1) copyright update for 2001 (hunks 1 & 6)
(2) removing few unused DEVF_* constants (hunks 2 & 3)
(3) changed PPC compatibility code - old code was checking wrong
conditional defines (hunk 5)
(4) most important - get it to work on 8MB Mystique (hunk 4)
Thanks,
Petr Vandrovec
vandrove@vc.cvut.cz
diff -urdN linux/drivers/video/matrox/matroxfb_base.c linux/drivers/video/matrox/matroxfb_base.c
--- linux/drivers/video/matrox/matroxfb_base.c Fri Dec 29 22:07:23 2000
+++ linux/drivers/video/matrox/matroxfb_base.c Thu Jan 25 17:31:50 2001
@@ -2,9 +2,9 @@
*
* Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200 and G400
*
- * (c) 1998,1999,2000 Petr Vandrovec <vandrove@vc.cvut.cz>
+ * (c) 1998-2001 Petr Vandrovec <vandrove@vc.cvut.cz>
*
- * Version: 1.50 2000/08/10
+ * Version: 1.51 2001/01/25
*
* MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org>
*
@@ -1409,12 +1409,12 @@
#define DEVF_VIDEO64BIT 0x0001
#define DEVF_SWAPS 0x0002
-#define DEVF_MILLENNIUM 0x0004
-#define DEVF_MILLENNIUM2 0x0008
+/* #define DEVF_recycled 0x0004 */
+/* #define DEVF_recycled 0x0008 */
#define DEVF_CROSS4MB 0x0010
#define DEVF_TEXT4B 0x0020
#define DEVF_DDC_8_2 0x0040
-#define DEVF_DMA 0x0080
+/* #define DEVF_recycled 0x0080 */
#define DEVF_SUPPORT32MB 0x0100
#define DEVF_ANY_VXRES 0x0200
#define DEVF_TEXT16B 0x0400
@@ -1441,19 +1441,19 @@
#ifdef CONFIG_FB_MATROX_MILLENIUM
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL, 0xFF,
0, 0,
- DEVF_MILLENNIUM | DEVF_TEXT4B,
+ DEVF_TEXT4B,
230000,
&vbMillennium,
"Millennium (PCI)"},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL_2, 0xFF,
0, 0,
- DEVF_MILLENNIUM | DEVF_MILLENNIUM2 | DEVF_SWAPS,
+ DEVF_SWAPS,
220000,
&vbMillennium2,
"Millennium II (PCI)"},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MIL_2_AGP, 0xFF,
0, 0,
- DEVF_MILLENNIUM | DEVF_MILLENNIUM2 | DEVF_SWAPS,
+ DEVF_SWAPS,
250000,
&vbMillennium2A,
"Millennium II (AGP)"},
@@ -1461,13 +1461,13 @@
#ifdef CONFIG_FB_MATROX_MYSTIQUE
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS, 0x02,
0, 0,
- DEVF_VIDEO64BIT,
+ DEVF_VIDEO64BIT | DEVF_CROSS4MB,
180000,
&vbMystique,
"Mystique (PCI)"},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_MYS, 0xFF,
0, 0,
- DEVF_VIDEO64BIT | DEVF_SWAPS,
+ DEVF_VIDEO64BIT | DEVF_SWAPS | DEVF_CROSS4MB,
220000,
&vbMystique,
"Mystique 220 (PCI)"},
@@ -1842,33 +1842,33 @@
}
/* FIXME: Where to move this?! */
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_ALL_PPC)
#if defined(CONFIG_FB_COMPAT_XPMAC)
strcpy(ACCESS_FBINFO(matrox_name), "MTRX,"); /* OpenFirmware naming convension */
strncat(ACCESS_FBINFO(matrox_name), b->name, 26);
if (!console_fb_info)
console_fb_info = &ACCESS_FBINFO(fbcon);
#endif
- if ((xres <= 640) && (yres <= 480)) {
+#ifndef MODULE
+ if (_machine == _MACH_Pmac) {
struct fb_var_screeninfo var;
- if (default_vmode == VMODE_NVRAM) {
- default_vmode = nvram_read_byte(NV_VMODE);
- if (default_vmode <= 0 || default_vmode > VMODE_MAX)
- default_vmode = VMODE_CHOOSE;
- }
if (default_vmode <= 0 || default_vmode > VMODE_MAX)
default_vmode = VMODE_640_480_60;
+#ifdef CONFIG_NVRAM
if (default_cmode == CMODE_NVRAM)
default_cmode = nvram_read_byte(NV_CMODE);
+#endif
if (default_cmode < CMODE_8 || default_cmode > CMODE_32)
default_cmode = CMODE_8;
if (!mac_vmode_to_var(default_vmode, default_cmode, &var)) {
var.accel_flags = vesafb_defined.accel_flags;
var.xoffset = var.yoffset = 0;
- vesafb_defined = var; /* Note: mac_vmode_to_var() doesnot set all parameters */
+ /* Note: mac_vmode_to_var() does not set all parameters */
+ vesafb_defined = var;
}
}
-#endif /* CONFIG_PPC */
+#endif /* !MODULE */
+#endif /* CONFIG_ALL_PPC */
vesafb_defined.xres_virtual = vesafb_defined.xres;
if (nopan) {
vesafb_defined.yres_virtual = vesafb_defined.yres;
@@ -2502,8 +2502,8 @@
/* *************************** init module code **************************** */
-MODULE_AUTHOR("(c) 1998,1999 Petr Vandrovec <vandrove@vc.cvut.cz>");
-MODULE_DESCRIPTION("Accelerated FBDev driver for Matrox Millennium/Mystique/G100/G200/G400");
+MODULE_AUTHOR("(c) 1998-2001 Petr Vandrovec <vandrove@vc.cvut.cz>");
+MODULE_DESCRIPTION("Accelerated FBDev driver for Matrox Millennium/Mystique/G100/G200/G400/G450");
MODULE_PARM(mem, "i");
MODULE_PARM_DESC(mem, "Size of available memory in MB, KB or B (2,4,8,12,16MB, default=autodetect)");
MODULE_PARM(disabled, "i");
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:22 EST