-I is what is read directly off the drive, -i interprets it. IIRC, it's been
this way for a while..or it's just that I've used 2.4 for a while :) In any
case, it's byte swap issue. WD becomes "WDC AC" would become "DW CCA" , i.e.
"WD", "C ", and "AC" etc.
-d
Shawn Starr wrote:
> This is what the device names are:
>
> hda: FUJITSU MPE3064AT, ATA DISK drive
> hdb: WDC AC32500H, ATA DISK drive
>
> here's what they are with hdparm:
>
> dev/hda:
>
> Model=UFIJST UPM3E60A4 T , FwRev=DE0--380,
> SerialNo= 50256499
>
> /dev/hdb:
>
> Model=DW CCA2305H0 , FwRev=210.H721,
> SerialNo=DWW-3T06418895 2
>
> hehe, might wanna fix that ;-)
>
> Shawn.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> Please read the FAQ at http://www.tux.org/lkml/
-- There is a natural aristocracy among men. The grounds of this are virtue and talents. Thomas Jefferson The good thing about standards is that there are so many to choose from. Andrew S. Tanenbaum- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:27 EST