On Mon, 29 Jan 2001, Robert Siemer wrote:
> From: Linus Torvalds <torvalds@transmeta.com>
>
> > Another one..
>
> > Robert, can you get the dump_pirq script from the pcmcia_cs package
> > and send the output to us?
>
> ...it seems to reflect my settings in the bios:
No, but that's really interesting..
> Device 00:01.0 (slot 0): ISA bridge
> INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
> INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
> INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
> INTD: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Your "link" values are in the range 1-4. Which makes perfect sense, but
that's absolutely _not_ what the Linux SiS routing code expects (the code
seems to expect them to be ASCII 'A' - 'D').
It looks very much like "pirq_sis_get()" and "pirq_sis_set()" in
arch/i386/kernel/pci-irq.c are broken for your setup.
Can you replace them with the following:
static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
{
if (pirq <= 4) {
u8 x;
pci_read_config_byte(router, 0x40+pirq, &x);
return (x & 0x80) ? 0 : (x & 0xf);
}
printk("Unknown SiS pirq value %d\n", pirq);
return 0;
}
and
static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
{
if (pirq <= 4) {
pci_write_config_byte(router, 0x40 + pirq, irq);
return 1;
}
printk("Unknown SiS pirq value %d\n", pirq);
return 0;
}
and see if that changes the behaviour.
Anybody else with SiS chipsets that want to try the above? Please..
Linus
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 31 2001 - 21:00:31 EST