Bakonyi Ferenc wrote:
> Louis Garcia <louisg00@bellsouth.net> wrote:
>
>> I gave upgraded to 2.4.2pre on my RH7 box and while using riva-128 fb
>> noticed when in X all the white parts of my desktop are to dark, it is
>> almost unreadable. I think it might have to do with video timing, is
>> there a way to fix this?
>
>
> Hi!
>
> Color handling on Riva 128 in 8bpp mode is a little bit confused.
> The table below summarizes the depth of color registers in 8bpp mode:
>
> | Riva 128 | Riva TNT and higher
> ----------------+----------+--------------------
> XF86 | 6 bit | 8 bit
> ----------------+----------+--------------------
> rivafb < 0.7.2 | 6 bit | 6 bit 'dark console'
> ----------------+----------+--------------------
> rivafb 0.7.3 | 6 bit | 8 bit
> ----------------+----------+--------------------
> rivafb 0.9.2 | 8 bit | 8 bit
> ----------------+----------+--------------------
>
> The Riva hardware can be programmed to expect 8 bit or 6 bit color
> registers. Rivafb < 0.7.2 used 6 bit color registers, but the hw was
> programmed to 8 bit registers on TNT/TNT2. That was causing the so
> called 'dark console' bug.
> Rivafb 0.9.2 begins to utilize 8 bits on Riva 128, but your X server
> uses only 6 bits of them so your desktop's brightness is 1/4. Now
> Riva 128 has a 'dark X' bug. :)
> The X server should be patched. Which X server/version are you using?
>
> Regards:
> Ferenc Bakonyi
>
>
>
>
I'm using XFree86-4.0.1 with the nv driver. You are right, it's ver
0.9.2 for the fb.
Where can I get the patch? Should I upgrade to XFree86-4.0.2?
Lou
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Feb 07 2001 - 21:00:22 EST