I checked this but there is no error in my lilo configuration file. root
value is the same for my images /boot/vmlinuz-2.2.18 (label=linux) and
/boot/vmlinuz-2.2.19pre (label=linuxpre).
All it's ok if I boot on "linux" but I have this Kernel panic if I boot on
"linuxpre". I used the same .config file (of 2.2.18 kernel) to make my new
2.2.19pre16 kernel.
I have lot of partitions (8). The order is :
/dev/hda1 (mounted on /boot)
/dev/hda2 (extended)
/dev/hda5 (mounted on /usr)
/dev/hda6 (mounted on /home)
/dev/hda7 (swap)
/dev/hda8 (mounted on /)
/dev/hda9 (mounted on /tmp)
/dev/hda10 (mounted on /var)
-----Original Message-----
From: linux-kernel-owner@vger.kernel.org
[mailto:linux-kernel-owner@vger.kernel.org]On Behalf Of Jeremy Jackson
Sent: Tuesday, March 06, 2001 5:18 PM
To: Stephane GARIN
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.2.19pre - Kernel Panic: no init found
Stephane GARIN wrote:
> Hi,
>
> I tried with init=/bin/sh but no success. I download a 2.2.18 Kernel and I
> use patch 2.2.19pre16 but no success too... I don't know why there is this
> error with this 2.2.19 kernel but not with my 2.2.18 kernel. I'm ready to
> send all technical information about my computer (PIII 650 with 256Mb and
a
> ABIT BX133-RAID mothercard).
looks like you have a lot of partitions. maybe the kernel isn't using the
right one
for root filesystem? if using LILO to boot, make sure root= line for your
new
kernel is the same as old one. if using redhat on a large disk, it will set
up
the first partition as /boot filesystem, so kernel will mount it ok, but
won't
find any programs like init or sh on it.
Let me know how this works out.
>
>
> With Regards,
> Stephane Garin
>
> -----Message d'origine-----
> De : James Stevenson
> Envoyé : samedi 3 mars 2001 18:58
> À : sgarin@sgarin.com
> Objet : Re: 2.2.19pre - Kernel Panic: no init found
>
> Hi
>
> it would mean pass something like
> init=/bin/sh
> not the runlevel you want
>
> In local.linux-kernel-list, you wrote:
> >Hi,
> >
> >I have a kernel panic with the patch 2.2.19pre16 that I test. I use a
> 2.2.18
> >Kernel very well. I used the last patch on this kernel and make my kernel
> >with sames parameters without error message. At the boot, I can see this
:
> >
> >..
> >eth0: RealTek RTL8139 Fast Ethernet at 0xa800, IRQ 10, 00:50:fc:0b:60:70
> >eth1: RealTek RTL8139 Fast Ethernet at 0xac00, IRQ 11, 00:50:fc:1f:c1:98
> >Partition check:
> > hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
> >Trying to vfree() noexistent vm area (c00f0000)
> >VFS: Mounted root (ext2 filesystem) readonly.
> >Freeing unused kernel memory: 68k freed
> >Kernel panic: No init found. Try passing init= option to kernel.
> >
> >
> >
> >I tried to start with init=3 but no change. I send this information on
this
> >mailing list because I think that could be a bug. Sorry if it is a wrong
> >action of me...
> >
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Mar 07 2001 - 21:00:20 EST