On Thu, 8 Mar 2001 19:51:07 +0100, Vojtech Pavlik wrote:
>They're about the same - only Alan didn't like the PCI speed measurement
>code that's new in the 4.x series, so I added all the other changes to
>the 3.20 driver, and 3.21 was born.
I do understand Alan's objections against this speed measurement code
very well. I have similar code built into other (non-Linux) drivers,
and according to the many user reports that I got the measurement
results should be taken with a grain of salt. It is working perfectly
in most cases, but it may fail from time to time. There is a hidden
assumption in this type of measurement which the device that you run
the test against has to fulfill. If it doesn't (and it is not required
to do to be conforming to the ATA spec), the measurement results (PCI
bus clock) are bogus (typically way too high).
Ciao,
Dani
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Daniela Engert, systems engineer at MEDAV GmbH
Gräfenberger Str. 34, 91080 Uttenreuth, Germany
Phone ++49-9131-583-348, Fax ++49-9131-583-11
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 15 2001 - 21:00:09 EST