11,3 is "Multiple read errors". You can find all of the ASC and ASCQ
listed in any SCSI spec document. You can find the SCSI-2 specs at
<ftp://ftp.t10.org/t10/drafts/s2/s2-r10l.pdf>.
-- KhalidCamm Maguire wrote: > > Thank you again for your help. While I do seem to get more errors > with the ide-tape driver, I am also seeing some problems on further > examination which are common to both ide-tape and st over ide-scsi, so > perhaps I have a bad drive or tape. > > When trying to mt eom, for example, I get > > ============================================================================= > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16 > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5 > ASC=20 ASCQ= 0 > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 > st0: Can't read block limits. > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8 > st0: Density 45, tape length: 0, drv buffer: 1 > st0: Block size: 512, buffer size: 32768 (64 blocks). > st0: Retensioning tape. > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16 > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5 > ASC=20 ASCQ= 0 > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 > st0: Can't read block limits. > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8 > st0: Density 45, tape length: 0, drv buffer: 1 > st0: Block size: 512, buffer size: 32768 (64 blocks). > st0: Spacing tape forward over 16383 filemarks. > st0: Spacing to end of recorded medium. > st0: Error: 28000000, cmd: 11 3 0 0 0 0 Len: 16 > Info fld=0x3feb, Deferred st09:00: sns = f1 3 > ASC=11 ASCQ= 3 > Raw sense data:0xf1 0x00 0x03 0x00 0x00 0x3f 0xeb 0x0a 0x00 0x00 0x00 0x00 0x11 0x03 0x00 0x00 > st0: Error: 28000000, cmd: 5 0 0 0 0 0 Len: 16 > [valid=0] Info fld=0x0, Current st09:00: sns = 70 5 > ASC=20 ASCQ= 0 > Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 > st0: Can't read block limits. > st0: Mode sense. Length 11, medium b6, WBS 10, BLL 8 > st0: Density 45, tape length: 0, drv buffer: 1 > st0: Block size: 512, buffer size: 32768 (64 blocks). > st0: Rewinding tape. > ============================================================================= > > What is the 11,3? Where can I find these codes listed? Why is the > drive having trouble finding the end of the tape? I'll be testing > more tapes soon, but this definitely happens with at least several. > The mt command returned to the prompt with 'Input/ouput error'. > > Many Thanks again, >
-- ==================================================================== Khalid Aziz Linux Development Laboratory (970)898-9214 Hewlett-Packard khalid@fc.hp.com Fort Collins, CO - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 15 2001 - 21:00:13 EST