"Rafael E. Herrera" wrote:
>
> sr0: scsi3-mmc drive: 16x/16x xa/form2 changer
> sr0: CDROM (ioctl) reports ILLEGAL REQUEST.
> sr1: scsi3-mmc drive: 16x/16x xa/form2 changer
> sr1: CDROM (ioctl) reports ILLEGAL REQUEST.
> sr2: scsi3-mmc drive: 16x/16x xa/form2 changer
> sr2: CDROM (ioctl) reports ILLEGAL REQUEST.
> sr3: scsi3-mmc drive: 16x/16x xa/form2 changer
> sr3: CDROM (ioctl) reports ILLEGAL REQUEST.
> sr4: scsi3-mmc drive: 16x/16x xa/form2 changer
> sr4: CDROM (ioctl) reports ILLEGAL REQUEST.
> sr5: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> SCSI device sda: 17783240 512-byte hdwr sectors (9105 MB)
> sda: sda1 sda2 sda3 sda4
> SCSI device sdb: 8388315 512-byte hdwr sectors (4295 MB)
> sdb: sdb1
My guess is, ILLEGAL REQUEST is caused by the sr driver issuing
"Mechanism Status" (0xbd) command to the CDROM drives sr0, sr1, sr2, sr3
and sr4. The reason sr driver is issuing this command is because the
loading mechanism type field in CD-ROM capabilities page is set to 0x4
(changer). Does the Nakamichi drive put the changer mechanism on a
separate LUN, e.g. 1? If so, maybe the "Mechanism Status" commnad should
go to LUN 1 but cdrom_read_mech_status() does not set the LUN field in
cgc.cmd[1] to any value other than 0. Could this be the reason for
ILLEGAL REQUEST?
-- Khalid==================================================================== Khalid Aziz Linux Development Laboratory (970)898-9214 Hewlett-Packard khalid@fc.hp.com Fort Collins, CO - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 23 2001 - 21:00:09 EST