On Mon, 2 Apr 2001 17:43:42, Petr Vandrovec <vandrove@vc.cvut.cz>
wrote:
> Trevor Hemsley wrote:
>
> > I get this as well on my G200. From observation it appears that the
> > refresh rate is being doubled when you exit X and that's why the
> > console appears blank. On my system I normally use
> >
> > modprobe matroxfb vesa=263 fv=85
> >
> > to give a large text console. On return from X, if I blindly type
> >
> > fbset "640x480-60"
> >
> > then I get a visible screen back but my monitor tells me that it's
> > running at 640x480@119Hz. Same thing for 800x600-60 only this one says
> > 120Hz.
>
> Unfortunately Matrox datasheet says that it is impossible :-( Can you
> try 'fbset -depth 0; fbset -depth 8' ?
Yes, that fixes it. Issuing the first fbset command brings me back
some sort of display, all fsck'ed up but vaguely readable with
shimmering bits of text all over it in the wrong places. The second
fbset gets it back correctly at the right resolution and right refresh
rate. Thanks, a workaround at least.
-- Trevor Hemsley, Brighton, UK. Trevor-Hemsley@dial.pipex.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Apr 07 2001 - 21:00:10 EST