Re: SCSI Tape Corruption - update

From: Geert Uytterhoeven (geert@linux-m68k.org)
Date: Fri Apr 13 2001 - 02:13:27 EST


On Fri, 13 Apr 2001, Geert Uytterhoeven wrote:
> On Thu, 12 Apr 2001 lomarcan@tin.it wrote:
> > It seems that the tape is written incorrectly. I wrote some large file
> > (300MB)
> > and read it back four time. The read copies are all the same. They differ
> > from the original only in 32 consecutive bytes (the replaced values SEEM
> > random). Of course, 32 bytes in 300MB tar.gz files are TOO MUCH to be
> > accepted :)
>
> In my case, the 32 bad bytes are always a copy of the 32 bytes 10K before (10K
> = blocksize of tar). Can you verify that's the case for you as well? For
> reference, I have approx. 6 sequences of corrupted data when writing 256 MB to
> tape. Reading gives no problems.

Forgot some things...

It also happens with dd, so it's not a bug in tar.
If I set the tar blocksize to 512 bytes, the offset changes to 512 bytes as
well.
If I set the tar blocksize to 57*512 bytes, I didn't see a problem (however,
could have been `good luck').

The problem seems to be there since at least 2.4.0-test1-ac10, which means
quite some people may no longer have known good backups of their valuable data
(of course we should not run 2.[34].x kernels on our systems, right? :-)

Since you have a different SCSI host adapter, the problem is most likely in
st.c. I was thinking of writing `predictable' data (or checksummed blocks or
so) to tape and add some data verification tests to st.c at the very last
moment before it sends a write command to the SCSI host adapter, but I haven't
found time for that yet.

Gr{oetje,eeting}s,

                                                Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Apr 15 2001 - 21:00:20 EST