USB problems since 2.4.2

From: josh (skulcap@mammoth.org)
Date: Mon Apr 23 2001 - 20:49:11 EST


Kernel: 2.4.2 - latest (2.4.3-ac12)
Platform: x86 on mangled Slack7.1
Hardware: MSI 694D Pro-AR
( http://www.msicomputer.com/products/detail.asp?ProductID=150 )

Problem: USB devices timeout on address assignment. Course thats with the
non JE driver, with the JE driver the bus doesnt even say that anything
gets connected.

messages when driver loads:
*************************************
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 00:58:23 Apr 23 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 19
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 19
usb-uhci.c: Detected 2 ports
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usblp
usb.c: registered new driver dc2xx
*************************************
  
when any device is plugged in:
*************************************
hub.c: USB new device connect on bus1/1, assigned device number 4
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=4 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 5
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=5 (error=-110)
*************************************

                          www.mammoth.org/~skulcap
**********************************************BEGIN GEEK CODE BLOCK************
"Sometimes, if you're perfectly * GCS d- s: a-- C++ ULSC++++$ P+ L+++ E---
still, you can hear the virgin * W+(++) N++ o+ K- w--(---) O- M- V- PS--
weeping for the savior of your will."* PE Y+ PGP t+ 5 X+ R !tv b+>+++ DI++ D++
 --DreamTheater, "Lines in the Sand" * G e h+ r-- y- (www.geekcode.com)
**********************************************END GEEK CODE BLOCK**************

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon Apr 23 2001 - 21:00:49 EST