Hi,
my /proc/interrupts doesn't show all the interrupts that have been used,
/proc/stat (and hence procinfo) does. All of the devices work without
problems.
% cat /proc/interrupts /proc/stat && procinfo
CPU0
0: 476919 XT-PIC timer
1: 12333 XT-PIC keyboard
2: 0 XT-PIC cascade
3: 221 XT-PIC
5: 8388 XT-PIC soundblaster
7: 0 XT-PIC parport0
8: 67 XT-PIC rtc
10: 53 XT-PIC advansys, ncr53c8xx
11: 35704 XT-PIC HiSax
12: 49384 XT-PIC PS/2 Mouse
14: 29 XT-PIC ide0
15: 39616 XT-PIC ide1
NMI: 0
ERR: 0
cpu 25315 461 35481 415662
cpu0 25315 461 35481 415662
page 331823 243999
swap 2 0
intr 622904 476919 12333 0 221 160 8388 30 0 67 0 53 35704 49384 0 29 39616 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
disk_io: (2,0):(34,34,37,0,0) (3,0):(5,5,10,0,0) (8,0):(8,8,16,0,0)
ctxt 2581888
btime 988535311
processes 1291
Linux 2.4.4-pre4 (root@elmicha) (gcc 2.95.3 20010315 ) #2 1CPU [elmicha.(none)]
Memory: Total Used Free Shared Buffers Cached
Mem: 384352 319980 64372 0 4816 137528
Swap: 939752 260 939492
Bootup: Sun Apr 29 11:08:31 2001 Load average: 0.05 0.13 0.10 6/103 1292
user : 0:04:13.15 5.3% page in : 331823
nice : 0:00:04.61 0.1% page out: 243999
system: 0:05:54.82 7.4% swap in : 2
idle : 1:09:16.62 87.2% swap out: 0
uptime: 1:19:29.19 context : 2581892
irq 0: 476920 timer irq 7: 0 parport0
irq 1: 12333 keyboard irq 8: 67 rtc
irq 2: 0 cascade [4] irq 10: 53 advansys, ncr53c8xx
irq 3: 221 irq 11: 35704 HiSax
irq 4: 160 irq 12: 49384 PS/2 Mouse
irq 5: 8388 soundblaster irq 14: 29 ide0
irq 6: 30 irq 15: 39616 ide1
So IRQ 3 doesn't know it's getting serviced by the serial module, IRQ 4
and IRQ 6 don't show in /proc/interrupts (and I've used both serial
ports and the floppy before), only in /proc/stat.
This is an Athlon 700 on a Gigabyte 7IXE (Irongate/Viper), gcc-2.95.3
compiled 2.4.4-pre4. Some lines from .config:
CONFIG_MK7=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
# CONFIG_SMP is not set
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
Have I done something wrong? Should I send more info?
Regards...
Michael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 30 2001 - 21:00:22 EST