Re: pcmcia problems after upgrading from 2.4.3-ac7 to 2.4.4

From: Martin.Knoblauch (Martin.Knoblauch@TeraPort.de)
Date: Fri May 04 2001 - 06:01:37 EST


Alan Cox wrote:
>
> > my DE-620 pccard stopped working after upgrading the kernel from
> > 2.4.3-ac7 to 2.4.4. This is on a Toshiba 4080XCDT. I used the "good"
> > .config from the 2.4.3-ac7 build to do a make "oldconfig". The symptoms
> > at startup are:
>
> 2.4.4 has older pcmcia than 2.4.3-ac7. It might be that. Does 2.4.4-ac work ?

 just some additional info. The card actually stopped working in
2.4.3-a11 upwards with the same symptoms as in my original request.

 2.4.3-ac9 is the last working one. Not sure about -ac10, because that
one crashes during boot (not related to pcmcia as far as I can
remember). So, what was added in ac11 or ac10 that could hurt pcmcia or
the i82365 module?

 I'll now try 2.4.4-ac4.

Martin

-- 
------------------------------------------------------------------
Martin Knoblauch         |    email:  Martin.Knoblauch@TeraPort.de
TeraPort GmbH            |    Phone:  +49-89-510857-309
IT Services              |    Fax:    +49-89-510857-111
http://www.teraport.de   |    Mobile: +49-170-4904759


- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Mon May 07 2001 - 21:00:19 EST