Chip Schweiss wrote:
>
> I'm trying to get a 2.2.19 kernel loaded on an i810 system using RPLD on
> a diskless system. I can get the kernel loaded and running. The
> problem is the i810 needs the kernel parameter "mem=xxxM" set to tell
> the kernel how much memory the system has since the on the i810 the
> kernel doesn't know how much was taken for video.
>
> The catch I'm running into is RPLD cannot pass parameters to the kernel
> and without this setting the system has video problem, most likely from
> the memory sharing issues. When the mem parameter is set when using a
> disk it doesn't demonstrate any problems.
>
> What I'm trying to figure out is how to compile in this setting.
>
> Thanks,
> Chip Schweiss
Try a 2.4 kernel. If the BIOS is reserving memory for the video card it
should show up in the e820 memory map. 2.2.x last I checked doesn't use
e820 for memory detection.
--Brian Gerst - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon May 07 2001 - 21:00:21 EST