VIA/PDC/Athlon

From: Jussi Laako (jlaako@pp.htv.fi)
Date: Wed May 16 2001 - 12:25:56 EST

Next message: ps: "Re: RH 7.1 on IBM xSeries 240"
Previous message: Axel Siebenwirth: "Transmit time out on eth1 (rtl8139) / dirty entry in queue [again]"
Next in thread: Vojtech Pavlik: "Re: VIA/PDC/Athlon"
Reply: Vojtech Pavlik: "Re: VIA/PDC/Athlon"
Reply: Alan Cox: "Re: VIA/PDC/Athlon"
Reply: Zilvinas Valinskas: "Re: VIA/PDC/Athlon"
Maybe reply: Pavel Roskin: "Re: VIA/PDC/Athlon"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

I tested 2.4.4-ac9 today on A7V133 machine. It booted up, but can't stand
any load. It will deadlock (without oops) when the network/disk system faces
any load.

There is also some new bug in VIA IDE driver. It misdetects cable as 80-w
when it's only 40-w and causes some CRC errors and speed dropping. Some
older kernels correctly detected the cable as 40-w and used UDMA33, this one
tries to use UDMA100 and fails (of course). Is there any way to force cable
detection to 40-w?

- Jussi Laako

-- 
PGP key fingerprint: 161D 6FED 6A92 39E2 EB5B  39DD A4DE 63EB C216 1E4B
Available at PGP keyservers
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: ps: "Re: RH 7.1 on IBM xSeries 240"
Previous message: Axel Siebenwirth: "Transmit time out on eth1 (rtl8139) / dirty entry in queue [again]"
Next in thread: Vojtech Pavlik: "Re: VIA/PDC/Athlon"
Reply: Vojtech Pavlik: "Re: VIA/PDC/Athlon"
Reply: Alan Cox: "Re: VIA/PDC/Athlon"
Reply: Zilvinas Valinskas: "Re: VIA/PDC/Athlon"
Maybe reply: Pavel Roskin: "Re: VIA/PDC/Athlon"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Wed May 23 2001 - 21:00:18 EST