HP scanner SCSI card with 53c400a

• Next message: Mike Kravetz: "Re: reschedule_idle changes in ac kernels"
• Previous message: Remi Turk: "Re: 2.4.5-ac8 hardlocks when going to standby"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi

I have an old SCSI card that came with old HP scanner. It contains NCR 53c400a chip, one 3pin jumper and some PAL logics. I tried
modprobe g_NCR5380 ncr_53c400a=1 ncr_addr=0x280 ncr_irq=255 as described in kernel docs, and it writes No device always.
It works fine at address 0x280 under Winslows. Is there a chance to make it working under Linux 2.4.x?

Tomas

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

• Next message: Mike Kravetz: "Re: reschedule_idle changes in ac kernels"
• Previous message: Remi Turk: "Re: 2.4.5-ac8 hardlocks when going to standby"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu Jun 07 2001 - 21:00:42 EST