Nico Schottelius wrote:
> There is in fact no terminator, the scsi disc should terminate the bus
> itself. It is directly connected to the onboard aix7880 scsi controller.
> I will use another cable in about half an hour (when my friend arrives..)
>
> Thanks for the hint!
>
> Nico
>
I would suggest checking "Term Enable" jumper on the disk just to be
sure. This jumper needs to be on for most (I would think all) drives to
terminate the bus.
-- Khalid ==================================================================== Khalid Aziz Linux Development Laboratory (970)898-9214 Hewlett-Packard khalid@fc.hp.com Fort Collins, CO - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Jun 07 2001 - 21:01:02 EST