I have just upgraded from Linux Kernel 2.4.5 to 2.4.6 and I have a small annoying problem with the eepro100 driver. Every time I put my system into an APM suspend and then resume the machine, the driver stops working and will not let me bring up the interface until I remove the module and reinstall it. I am using the exact same config as I did in 2.4.5. Computer is a Compaq Armada M700. I inserted in this message what I do at the command line and my syslog. It's not a big issue, just something that is a little annoying.
Mike Crawford
--- Stuff I do at the command line ---
[0] ryo-ohki:~# lsmod
Module Size Used by
eepro100 16464 0 (autoclean)
printer 5088 0
vfat 9424 0 (autoclean)
fat 32224 0 (autoclean) [vfat]
maestro 27104 2 (autoclean)
vmnet 18912 3
vmmon 18768 0 (unused)
md 42112 0 (unused)
uhci 23200 0 (unused)
usbcore 50064 1 [printer uhci]
[0] ryo-ohki:~# ifconfig eth0 172.18.228.21 netmask 255.255.0.0
SIOCSIFFLAGS: No such device
[0] ryo-ohki:~# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6581 errors:0 dropped:0 overruns:0 frame:0
TX packets:6581 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
vmnet1 Link encap:Ethernet HWaddr 00:50:56:01:00:00
inet addr:172.16.203.1 Bcast:172.16.203.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
[0] ryo-ohki:~# rmmod eepro100
[0] ryo-ohki:~# modprobe eepro100
[0] ryo-ohki:~# ifconfig eth0 172.18.228.21 netmask 255.255.0.0
[0] ryo-ohki:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:D0:59:17:9A:69
inet addr:172.18.228.21 Bcast:172.18.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:11 Base address:0x8000
--- Syslog ---
--- Right after resume ---
Jul 10 06:59:04 ryo-ohki kernel: apm: set display: Interface not engaged
Jul 10 06:59:06 ryo-ohki sysctl: net.ipv4.ip_forward = 0
Jul 10 06:59:06 ryo-ohki sysctl: net.ipv4.conf.all.rp_filter = 1
Jul 10 06:59:06 ryo-ohki sysctl: kernel.sysrq = 0
Jul 10 06:59:06 ryo-ohki network: Setting network parameters: succeeded
Jul 10 06:59:07 ryo-ohki network: Bringing up interface lo: succeeded
Jul 10 06:59:07 ryo-ohki ifup: SIOCSIFFLAGS: No such device
Jul 10 06:59:07 ryo-ohki ifup: SIOCADDRT: Network is down
Jul 10 06:59:07 ryo-ohki ifup: SIOCADDRT: Network is unreachable
Jul 10 06:59:08 ryo-ohki network: Bringing up interface eth0: succeeded
Jul 10 06:59:10 ryo-ohki netfs: Mounting other filesystems: succeeded
Jul 10 06:59:15 ryo-ohki apmd[607]: Normal Resume after 09:13:52 (90%
unknown) Battery power
Jul 10 07:14:22 ryo-ohki apmd[607]: Now using AC Power
Jul 10 07:14:22 ryo-ohki apmd[607]: Battery: 0.926130 (0:15) 1:22 (76%
unknown)
Jul 10 07:58:02 ryo-ohki su(pam_unix)[5975]: session opened for user root
by mike(uid=500)
Jul 10 07:58:03 ryo-ohki su(pam_unix)[5975]: session closed for user root
Jul 10 07:58:03 ryo-ohki su(pam_unix)[5982]: session opened for user root
by mike(uid=500)
Jul 10 08:06:22 ryo-ohki su(pam_unix)[5982]: session closed for user root
Jul 10 08:35:22 ryo-ohki su(pam_unix)[6242]: session opened for user root
by mike(uid=500)
--- This is when I started trying to get the interface up, all the syslog
shows is the mod being loaded ---
Jul 10 08:49:13 ryo-ohki kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Jul 10 08:49:13 ryo-ohki kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Jul 10 08:49:13 ryo-ohki kernel: PCI: Found IRQ 11 for device 00:09.0
Jul 10 08:49:13 ryo-ohki kernel: PCI: Sharing IRQ 11 with 00:08.0
Jul 10 08:49:13 ryo-ohki kernel: PCI: Sharing IRQ 11 with 00:09.1
Jul 10 08:49:13 ryo-ohki kernel: eth0: OEM i82557/i82558 10/100 Ethernet,
00:D0:59:17:9A:69, IRQ 11.
Jul 10 08:49:13 ryo-ohki kernel: Board assembly 98003c-000, Physical
connectors present: RJ45
Jul 10 08:49:13 ryo-ohki kernel: Primary interface chip i82555 PHY #1.
Jul 10 08:49:13 ryo-ohki kernel: General self-test: passed.
Jul 10 08:49:13 ryo-ohki kernel: Serial sub-system self-test: passed.
Jul 10 08:49:13 ryo-ohki kernel: Internal registers self-test: passed.
Jul 10 08:49:13 ryo-ohki kernel: ROM checksum self-test: passed
(0xdbd8681d).
Jul 10 08:49:14 ryo-ohki modprobe: modprobe: Can't locate module net-pf-4
Jul 10 08:49:14 ryo-ohki modprobe: modprobe: Can't locate module net-pf-5
Jul 10 08:49:14 ryo-ohki /etc/hotplug/net.agent: register event not
handled
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 15 2001 - 21:00:13 EST