On Thursday 12 July 2001 23:21, Luc Lalonde wrote:
> Hello folks,
>
> I'm having trouble identifying wether I'm having hardware or software(
> OS ) problems. For the past couple of Months I've been having system
> lockups every 10 days or so.
I had a similar problem with an Adaptec AHA-29160 (AIC-7892) when
doing transfers from a SCSI DVD-drive to SCSI hard disk. It was actually
very annoying since
- I did an update to SuSE 7.2
- it almost destroyed my installation (several runs of e2fsck needed, some
libs broken after the crash)
- the SCSI bus hang appeared not immediatly, but after several minutes
of activity.
I tried:
(1) to load aic7xxx_old (see
http://sdb.suse.de/de/sdb/html/ostoelt_aic7xxx_old.html) -> crashed also.
(2) I tried to disable tagged command queuing or set "tag_info" to
more moderate values since I noticed that the queue length was set
to an incredible length of 253. However, the new driver from Adaptec
just ignores the old kernel parameters.
(3) According to an SDB article
(http://sdb.suse.de/de/sdb/html/jsj_29160_interrupt.html),
I manually set all PCI slots to different interrupts (but I could not set
the interrupt of the graphics card). -> crashed also
(4) I finally managed to get a workable system again by booting with a 2.2.x
kernel (SuSE 7.1), copying the DVD to a hard disk and then install from the
hard disk.
(5) I compiled a custom kernel and set the queue length parameter to 8. The
system now appears to be stable with the new (!) driver.
My guess is: the new driver stresses the hardware more than the old driver.
And it may at least partly be a hardware problem involving slow devices.
(The same configuration that consistently crashed my DVD->HD transfers did
not crash in an hour of very heavy HD->HD transfers.)
And here is a hint for the developers. Before the driver went into an endless
loop of SCSI bus resets, it said something like "locking queue length to 64
for device 0:0:0" (the HD that the data was copied to).
Hope this helps,
Stefan J.
-- Stefan R. Jaschke <stefan@jaschke-net.de> http://www.jaschke-net.de - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Jul 15 2001 - 21:00:19 EST