Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo

From: Yusuf Goolamabbas (yusufg@outblaze.com)
Date: Mon Aug 20 2001 - 05:56:56 EST

Next message: Martin Dalecki: "Re: [PATCH] let Net Devices feed Entropy, updated (1/2)"
Previous message: Johan Adolfsson: "Re: [PATCH] let Net Devices feed Entropy, updated (1/2)"
In reply to: Alan Cox: "Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo"
Next in thread: Alan Cox: "Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo"
Reply: Alan Cox: "Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

> > > With 2.4.8-ac7, I get SCSI errors and the kernel fails to boot. If I
> > > compile with APIC enabled and APIC on UP also enabled, it boots
> > > cleanly
> >
> > I'm getting similair errors on 2.4.8-ac7 on my P2B-S motherboard using
> > the NEW AIC7xxx driver, the old isn't experiencing these problems. Further
> > i've been getting these errors since 2.4.3.
>
> There is a known BIOS irq routing table problem with a large number of Intel
> BIOS boards with onboard adaptec controllers. The fact that making it use
> the io-apic works suggest this is the same thing.

But 2.4.8 and 2.4.9 work without using io-apic.

-- 
Yusuf Goolamabbas
yusufg@outblaze.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Next message: Martin Dalecki: "Re: [PATCH] let Net Devices feed Entropy, updated (1/2)"
Previous message: Johan Adolfsson: "Re: [PATCH] let Net Devices feed Entropy, updated (1/2)"
In reply to: Alan Cox: "Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo"
Next in thread: Alan Cox: "Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo"
Reply: Alan Cox: "Re: aic7xxx errors with 2.4.8-ac7 on 440gx mobo"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu Aug 23 2001 - 21:00:34 EST