Hi,
Another release of the Compaq Hotplug PCI driver is available against
2.4.10-pre12 is at:
http://www.kroah.com/linux/hotplug/pci-hotplug-2001_09_20-2.4.10-pre12.patch.gz
With a full changelog at:
http://www.kroah.com/linux/hotplug/pci-hotplug-Changelog
Changes since the last release:
- forward ported to 2.4.10-pre12
- cleaned up the portions of the patch that touched the pci core
kernel code. The patch against those files is now smaller and
less intrusive.
- pci core only exports symbols needed by the hotplug pci
drivers if CONFIG_HOTPLUG is enabled
- Compaq driver cleanups, with more global symbols removed, and
a common namespace for the driver.
- Compaq controller specific /proc interface has been moved to
the proper /proc/drivers location.
- lots of testing with different pci device types.
Again, the old Compaq tool will not work with this version of the
driver. An updated version must be downloaded from the cvs tree at
sf.net at:
http://sourceforge.net/cvs/?group_id=32538
The current generic hotplug_pci interface is based on a controller
model. This will be changed to a slot based model, which will enable
the userspace interface code to be much cleaner, and models what the pci
hotplug spec recommends. Any comments on this is appreciated.
thanks,
greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 23 2001 - 21:00:40 EST