Yea, it is a single port card... I had meant to mention that in the email I
sent out... ie: that it wasn't reporting correctly... but, I didnt really
think it was related, since the eepro was doing the same thing.
As for comparing with ifconfig, I ran 'watch 1 ifconfig -a', and sure
enough, I have about ~7000-7500 packets coming in right now. And, the
'procinfo -D', reports ~21000-22000 interrupts per second.
Other sources I have used to confirm packet rate... include output from
'sniffer', a flow generator that was monitoring that link, and the hub this
machine is plugged into.
the hub has 3 active ports.. port 1 is one side of our internet conenction
(out to our provider), port 2 was from the hub over to our main router... port
3 is a mirror of the IN on port 1 and the OUT on port 2 to port 3. Comparing,
and verifying, showed port 3 getting 10K packets (this afternoon, which
obviously drops at night, which it is here now), and down to 7K now.
>===== Original Message From Andrew Morton <email@example.com> =====
>Chris Newton wrote:
>> I 'think' the number of interrupts being generated for the network
>> monitor, is excessive. Having talked quikly with Donald Becker, he
>> that I should be seeing a little less than the number of RX/TX packets/s on
>> wire, in terms of interrupts/s. That, however, is not what I am seeing. I
>> seeing 3 times as many interrupts/s as I am seeing packets/s.
>> I have used three network devices to look at the stream I am monitoring,
>> it is usually aorund 5K packet/s IN, and 5K out, fed full duplex into a
>> 3Com 3c982 (2.4.10 kernel reports that anyways). However, watching:
>3c982 is a dual-port server NIC. Is your card dual-port? If not, it's
>a 3c980, and I goofed :)
>> 'procinfo -D', reports on the order of 30,000 interrupts per second.
>That does sound rather high. You should compare the interrupt rate
>with the packet rate from `ifconfig' or /proc/net/dev.
>Normally, 3c59x will show approx three Tx packets per interrupt
>and one Rx packet per interrupt. It varies with workload, but
>it tends to vary in the "good" direction - at higher packet
>rates, we do more work in a single interrupt and the interrupt-per-packet
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to firstname.lastname@example.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 30 2001 - 21:00:36 EST