RE: Wrong SCSI bus scanning

From: Cress, Andrew R (andrew.r.cress@intel.com)
Date: Tue Sep 25 2001 - 14:10:34 EST


Jan,

The sym53c8xx and ncr53c8xx drivers depend on virtually the same chipsets,
so there is some potential for confusion in detecting adapters that do/dont
belong to each driver. This causes confusion for the corresponding drivers
in NT also.
Check the scan code in each driver.

Andy

-----Original Message-----
From: Jan-Benedict Glaw [mailto:jbglaw@lug-owl.de]
Sent: Monday, September 24, 2001 8:33 PM
To: linux-kernel@vger.kernel.org
Subject: Wrong SCSI bus scanning

Hi!

For me, SCSI bus # 2 gets double-assigned. Physical layout
is currently:

        Bus 0: AIC7xxx (U160 onboard)
                - ID0: IBM DDYS-T18350N
                
        Bus 1: AIC7xxx (2nd U160 onboard bus)
                - unused
        
        Bus 2: sym53c8xx ('875)
                - ID1: PLEXTOR CD-R PX-W1210S
                - ID2: PLEXTOR CD-ROM PX-40TS
                - ID3: PIONEER DVD-ROM DVD-305

        Bus 3: ncr53c8xx ('810)
                - ID0: HP CD-Writer 6020
                - ID1: PLASMON CDR4220

The U160 controller attaches to my boot disk, so it is compiled-in.
Both other drivers are modules.

When I insert modules for busses #2 and #3, *both* of them get
bus #2 assigned:

==> before additional modules:
weiss-ich-doch-nicht:~# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0 0) 'IBM ' 'DDYS-T18350N ' 'S96H' Disk
        0,1,0 1) *
        0,2,0 2) *
        0,3,0 3) *
        0,4,0 4) *
        0,5,0 5) *
        0,6,0 6) *
        0,7,0 7) *

==> after sym53c8xx:
weiss-ich-doch-nicht:~# cdrecord -scanbus
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0 0) 'IBM ' 'DDYS-T18350N ' 'S96H' Disk
        0,1,0 1) *
        0,2,0 2) *
        0,3,0 3) *
        0,4,0 4) *
        0,5,0 5) *
        0,6,0 6) *
        0,7,0 7) *
scsibus2:
        2,0,0 200) *
        2,1,0 201) 'PLEXTOR ' 'CD-R PX-W1210S' '1.02' Removable CD-ROM
        2,2,0 202) 'PLEXTOR ' 'CD-ROM PX-40TS ' '1.12' Removable CD-ROM
        2,3,0 203) 'PIONEER ' 'DVD-ROM DVD-305 ' '1.03' Removable CD-ROM
        2,4,0 204) *
        2,5,0 205) *
        2,6,0 206) *
        2,7,0 207) *

==> after additional insertion of ncr53c8xx:
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
scsibus0:
        0,0,0 0) 'IBM ' 'DDYS-T18350N ' 'S96H' Disk
        0,1,0 1) *
        0,2,0 2) *
        0,3,0 3) *
        0,4,0 4) *
        0,5,0 5) *
        0,6,0 6) *
        0,7,0 7) *
scsibus2:
        2,0,0 200) 'HP ' 'CD-Writer 6020 ' '1.07' Removable CD-ROM
        2,1,0 201) 'PLEXTOR ' 'CD-R PX-W1210S' '1.02' Removable CD-ROM
        2,2,0 202) 'PLEXTOR ' 'CD-ROM PX-40TS ' '1.12' Removable CD-ROM
        2,3,0 203) 'PIONEER ' 'DVD-ROM DVD-305 ' '1.03' Removable CD-ROM
        2,4,0 204) *
        2,5,0 205) *
        2,6,0 206) *
        2,7,0 207) *

==> Now, /proc/scsi/scsi contains:

weiss-ich-doch-nicht:/proc/scsi# cat scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: IBM Model: DDYS-T18350N Rev: S96H
  Type: Direct-Access ANSI SCSI revision: 03
Host: scsi2 Channel: 00 Id: 01 Lun: 00 <---------------------------
  Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.02
  Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 02 Lun: 00
  Vendor: PLEXTOR Model: CD-ROM PX-40TS Rev: 1.12
  Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 03 Lun: 00
  Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
  Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 00 Lun: 00
  Vendor: HP Model: CD-Writer 6020 Rev: 1.07
  Type: CD-ROM ANSI SCSI revision: 02
Host: scsi2 Channel: 00 Id: 01 Lun: 00 <---------------------------
  Vendor: PLASMON Model: CDR4220 Rev: 1.20
  Type: CD-ROM ANSI SCSI revision: 02

...which is obviously wrong. Any suggestion on where to start
to search the bug?

MfG, JBG

-- 
Jan-Benedict Glaw . jbglaw@lug-owl.de . +49-172-7608481
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Sun Sep 30 2001 - 21:00:39 EST