I would be interested in trying out your code.
-- Sean J. Swallow pgp (6.5.2) keyfile @ https://nurk.org/keyfile.txt
On Fri, 28 Sep 2001, Vojtech Pavlik wrote:
> On Thu, Sep 27, 2001 at 03:16:18PM -0700, Dan Hollis wrote: > > > On Thu, 27 Sep 2001, Vojtech Pavlik wrote: > > > On Thu, Sep 27, 2001 at 02:26:50PM -0700, Sean Swallow wrote: > > > > I just got a tyan tiger w/ the AMD Viper chipset on it. For some reason > > > > Linux will only set the onboard (AMD viper) chains to UDMA33. > > > > I'm using linux 2.4.9, and I have also tried 2.4.10. Is there a limitation > > > > to the AMD Viper driver? > > > > PS. The cables (2) are BRAND new ata100 cables. > > > The Viper can do UDMA66 max. At least it's doing it for me quite well. > > > > If he's got the Tyan Tiger i'm thinking of, it's the Tyan S2460 with > > AMD766 southbridge. Tyan says it will do U100: > > http://www.tyan.com/products/html/tigermp.html > > This southbridge is called Viper Plus as far as I know. In the past, > I've written a driver for this, but it didn't make it into the kernel, > because Andre also had his version. > > > AMD does too: > > http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_873,00.html > > > > And I've got the same problem with my S2460: > > > > Uniform Multi-Platform E-IDE driver Revision: 6.31 > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > AMD7411: IDE controller on PCI bus 00 dev 39 > > AMD7411: chipset revision 1 > > AMD7411: not 100% native mode: will probe irqs later > > AMD7411: disabling single-word DMA support (revision < C4) > > ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio > > ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio > > hda: 20010816 sectors (10246 MB) w/2048KiB Cache, CHS=1245/255/63, UDMA(33) > > hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63, UDMA(33) > > > > But these drives will do U66/U100: > > > > And yes, I *DO* have the proper cables. These same drives connected to a > > Promise 20267 or a VIA KT133 with the same cables will do U66/U100 > > perfectly. > > Perhaps I could dig up my code and you can give it a test. Would you be > interested? > >
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to firstname.lastname@example.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Sep 30 2001 - 21:00:59 EST