Re: Tuning Linux for high-speed disk subsystems

• Next message: Alan Cox: "Re: Tuning Linux for high-speed disk subsystems"
• Previous message: Matthias Andree: "Re: 2.4.x has finally made it!"
• In reply to: Roy Sigurd Karlsbakk: "Tuning Linux for high-speed disk subsystems"
• Next in thread: Alan Cox: "Re: Tuning Linux for high-speed disk subsystems"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Nov 13, 2001 at 03:29:13PM +0100, Roy Sigurd Karlsbakk wrote:
> After some testing at Compaq's lab in Oslo, I've come to the conclusion
> that Linux cannot scale higher than about 30-40MB/sec in or out of a
> hardware or software RAID-0 set with several stripe/chunk sizes tried out.

Eh, we do 60-70 MB/s reads and 110-120 MB/s writes on our RAIDs... from
linux.

> Does anyone know this stuff good enough to help me how to tune the system?
> PS: The CPUs were almost idle during the test. Tested file system was
> ext2.

I'd say you should get rid of your compaq raid controller and use a
regular SCSI-controller - 66Mhz 64 bit. (e.g. an adaptec)

-- 
Ragnar Kjørstad
Big Storage
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

• Next message: Alan Cox: "Re: Tuning Linux for high-speed disk subsystems"
• Previous message: Matthias Andree: "Re: 2.4.x has finally made it!"
• In reply to: Roy Sigurd Karlsbakk: "Tuning Linux for high-speed disk subsystems"
• Next in thread: Alan Cox: "Re: Tuning Linux for high-speed disk subsystems"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Thu Nov 15 2001 - 21:00:35 EST