Hi all,
when I insert a PCMCIA card (I tested 2 cards from a friend) in my Sony Vaio R600HEK I get a complete lockup.
I also have some weird kernel messages when the PCMCIA is started:
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: No IRQ known for interrupt pin A of device 01:02.0. Please try using pci=biosirq.
Yenta IRQ list 04b8, PCI irq0
Socket status: 30000410
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
I use the yenta_socket module, everything on a Debian testing (Woody) system. When the PCMCIA card is in the slot during boot it is correctly detected.
More info on this laptop can be found on
http://lx.student.wau.nl/~olivier/linux_on_r600hek/linux_on_r600hek.html
including dmesg output and lspci output and stuff like that
thanks for help
Olivier
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 23 2001 - 21:00:18 EST