On 19 Nov 01 at 23:38, Dan Merillat wrote:
> > they'll shed some light on the problem.
>
> Yes, yes. The boot messages are normal, and typing 'reset' once I login
> restores normal console. The code that sets up a scrolling window below tux
> is well, missing the mark.
>
> Tux looks like he's about 5 lines high, so lines 1-3 are tux, 4 is the one
> line of scroll, 5 is his feet, and 6-30 is the previous kernel boot
> messages.
It is known problem. At least known to me. After reboot and typing 'reset'
type 'dmesg' and then look for 'Console: switching to colour frame buffer
device...'. Above that message you'll find couple of radeon messages -
and you have to remove all printed during register_framebuffer() from
driver source - it looks to me like that '#if 1'-ed code in radeon_write_code
is suspect.
You must not do any output during register framebuffer. If you'll output
one line, I believe that it will still work, but if you'll do more,
kernel output is catched in upper Tux window instead of in the bottom half
of screen. And if you'll print really much of info during
register_framebuffer, kernel will die...
Best regards,
Petr Vandrovec
vandrove@vc.cvut.cz
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 23 2001 - 21:00:23 EST