On Wed, 21 Nov 2001, Anton Blanchard wrote:
> Hi,
>
> > Linux/ppc64 looks strange invention to me. As you know IO base addresses
> > are limited to 32 bit in PCI. And, btw, 32 bits seems to work just fine
> > here as PPC is defined from the driver as using normal IO. But, IIRC, the
> > strange Linux/PPC invention only supports MMIO. :-)
>
> Since all PCI IO is memory mapped on ppc64, IO addresses end up > 32 bits.
> Until recently we used to have an IO offset that we added to all accesses
> which kept the driver visible IO addresses < 32 bits. (This is still the
> case with ppc32)
>
> The change was made to support error handling, the 64 bit token has the
> pci bus,dev,fn embedded in it so that the low level IO routines can do
> error recovery if in{b,w,l} fails.
When it happens to implement a driver that involves both C code and some
firmware that works on the PCI-chip, using opaque handles as for C is not
enough. If you think your driver only with those abstractions, you will
get a bag of bits that does not work.
In such situations C abstractions are just dreams of some ideal world that
does not exists and that will never do. Having in mind and in some places
of the code the _reality_ is required if you want your stuff to have
chance to work.
> I didnt make these changes and it would seem we can link IO address <->
> pci bus,dev,fn in other ways, if it turns out many drivers cannot use u64
> for IO ports then we will have to investigate them.
The sym driver can do all what I wrote about regarding DMA addressing,
given expected kernel interfaces and appropriate hardware.
> > If you want to play with _explicit_ MMIO, you just have to remove a couple
> > of line from sym53c8xx.h. Here they are:
>
> Yes MMIO works fine. Is there a reason we force PCI IO on __powerpc__?
My opinion, may-be just 0.02 euros:
At the time of early PPC port, only a few courageous PCI device drivers
wanted to default to PCI-recommended MMIO. There were a least 1 driver
that wanted so, but not may more :). At this early time, the MMIO kernel
interface in ppc port was not behaving as expected and MMIO wasn't usable.
This lasted years. I would be very glad if MMIO related kernel interface
is now fine, but allow me to still doubt a bit about.
If Linux/ppc team can ensure that Linux/ppc is now ok for MMIO, then you
can send the corresponding patch, that default PPC to MMIO as seen by the
driver, to kernel maintainer(s) with my _full_ approbation.
Regards,
Gérard.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Nov 23 2001 - 21:00:28 EST