----- Original Message -----
From: "Richard B. Johnson" <firstname.lastname@example.org>
To: "Bradley D. LaRonde" <email@example.com>
Cc: "Thomas Capricelli" <firstname.lastname@example.org>; <email@example.com>
Sent: Thursday, December 13, 2001 2:41 PM
Subject: Re: Mounting a in-ROM filesystem efficiently
> On Thu, 13 Dec 2001, Bradley D. LaRonde wrote:
> > ----- Original Message -----
> > From: "Richard B. Johnson" <firstname.lastname@example.org>
> > To: "Bradley D. LaRonde" <email@example.com>
> > Cc: "Thomas Capricelli" <firstname.lastname@example.org>; <email@example.com>
> > Sent: Thursday, December 13, 2001 1:34 PM
> > Subject: Re: Mounting a in-ROM filesystem efficiently
> > > Well RAM is a hell of a lot cheaper than NVRAM. If you don't have
> > > the required RAM on your box, the hardware engineers screwed up
> > > and have to be "educated" preferably with an axe in the parking-lot.
> > As I mentioned before, there may be other-than-cost considerations for
> > choosing the amount of RAM on a box. For example, low power consumption
> > portable devices. For another example, a huge ROM database that doesn't
> > need to be in RAM all at once.
> > Regards,
> > Brad
> Then you make a block-device device-driver that extracts and uncompresses
> each read from ROM/NVRAM upon demand. It pretends to write. The actual
> data-storage device is still paged and it only writes to the caller's
> buffer so it doesn't use any RAM for storage.
Or you could use cramfs + the patch that I mentioned a few e-mails ago. :-)
> There are many arguments, but I don't think power consumption is
> one of them. Whatever they use for RAM on the palm machines allows
> the machines to run a week on 4 'aa' -size batteries. Maybe they
> grab kinetic energy from keystrokes using flea-generators ^;).
No flea-generators that I know of. :-)
SDRAM, even in self-refresh mode, does draw considerable current. But then
again so does decompressing stuff from ROM all the time.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to firstname.lastname@example.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sat Dec 15 2001 - 21:00:27 EST