On Wed, 26 Dec 2001, Victor Yodaiken wrote:
> On Mon, Dec 24, 2001 at 10:52:46AM -0800, Davide Libenzi wrote:
> > I know what you're saying but my goal now is to fix the scheduler not the
> > overall RT latency ( at least not the one that does not depend on the
>
> my bias is to fix the cause of the problem, but go ahead.
>
>
> > scheduler ). Just take for example your 17us for your 800MHz machine, in
> > my dual PIII 733 MHz with an rqlen of 4 the scheduler latency ( with that
> > std scheduler ) is about 0.9us ( real one, not lat_ctx ). That means the
> > the scheduler responsibility in your 17us is about 5%, and the remaining
> > 95% is due "external" kernel paths. With an rqlen of 16 ( std scheduler )
>
> No: we've measured. The time in our system, which does not follow any
> Linux kernel paths, is dominated by motherboard bus delays.
17us of bus delay ?!
UP or SMP ?
Under which kind of bus load ?
> > the latency peaks up to ~2.4us going to ~14-15% of scheduler responsibility.
> > I've coded this simple app :
> >
> > http://www.xmailserver.org/linux-patches/lnxsched.html#RtLats
> >
> > and i use it with the cpuhog ( hi-tech software that is available inside
> > the same link ) to load the run queue. I'm going to plot the measured
> > latency versus the runqueue length. Thanks to OSDLAB i'll have an 8 way
> > machine to make some test on these big SMPs. I'll code even the simple
> > app you're proposing but the real problem is how to load the system. The
> > cpuhog load is a runqueue load and is "neutral", that means that is the
> > same on all the systems. Loading the system with other kind of loads can
> > introduce a device-driver/hw dependency on the measure ( much or less run
> > time with irq disabled for example ).
>
> Try
> ping -f localhost&
> ping -f onsamelocalnet &
> dd if=/dev/hda1 of=/dev/null &
> make clean; make bzImage;
>
>
> as a simple start
Below is dumped the skeleton of a test app but i need an high res timer
patch to sleep 2-5ms
- Davide
/*
* rtttest by Davide Libenzi ( linux kernel scheduler rt latency sampler )
* Version 0.16 - Copyright (C) 2001 Davide Libenzi
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Davide Libenzi <davidel@xmailserver.org>
*
*
* The purpose of this tool is to measure the scheduler latency for
* real time tasks using the "latsched" kernel patch.
* Build:
*
* gcc -o rtttest rtttest.c -lrt
*
* Use:
*
* rtttest [--test-stime s] [--sleep-mstime ms] [--pause-mstime ms] [--priority p]
* [--sched-fifo] [--sched-rr] [-- cmdpath [arg] ...]
*
* --test-stime = Set the test time in seconds
* --sleep-mstime = Set the sleep time in milliseconds
* --pause-mstime = Set the pause time in milliseconds
* --priority = Set the real time task priority ( 1..99 )
* --sched-fifo = Set the real time task policy to FIFO
* --sched-rr = Set the real time task policy to RR
* -- = Separate the optional command to be executed during the test time
* cmdpath = Command to be executed
* arg = Command argouments
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <signal.h>
#include <string.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <time.h>
#include <signal.h>
#include <sched.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <linux/timex.h>
#define STD_SLEEP_TIME 4
#define PAUSE_SLEEP_TIME 200
#define STD_TEST_TIME 8
static volatile int stop_test = 0;
void sig_int(int sig)
{
++stop_test;
signal(sig, sig_int);
}
int main(int argc, char *argv[]) {
int ii, icmd, pausetime = PAUSE_SLEEP_TIME, testtime = STD_TEST_TIME,
policy = SCHED_FIFO, priority = 1, sleeptime = STD_SLEEP_TIME, numsamples;
pid_t expid = -1;
cycles_t cys, cye, cylat = 0, mscycles;
cycles_t *samples;
struct sched_param sp;
struct timespec ts1, ts2;
for (ii = 1; ii < argc; ii++) {
if (strcmp(argv[ii], "--test-stime") == 0) {
if (++ii < argc)
testtime = atoi(argv[ii]);
continue;
}
if (strcmp(argv[ii], "--sleep-mstime") == 0) {
if (++ii < argc)
sleeptime = atoi(argv[ii]);
continue;
}
if (strcmp(argv[ii], "--pause-mstime") == 0) {
if (++ii < argc)
pausetime = atoi(argv[ii]);
continue;
}
if (strcmp(argv[ii], "--priority") == 0) {
if (++ii < argc)
priority = atoi(argv[ii]);
continue;
}
if (strcmp(argv[ii], "--sched-fifo") == 0) {
policy = SCHED_FIFO;
continue;
}
if (strcmp(argv[ii], "--sched-rr") == 0) {
policy = SCHED_RR;
continue;
}
if (strcmp(argv[ii], "--") == 0) {
icmd = ++ii;
break;
}
}
numsamples = (testtime * 1000) / pausetime + 1;
if (!(samples = (cycles_t *) malloc(numsamples * sizeof(cycles_t)))) {
perror("malloc");
return 1;
}
if (icmd > 0 && icmd < argc) {
expid = fork();
if (expid == -1) {
perror("fork");
return 5;
} else if (expid == 0) {
setpgid(0, getpid());
execv(argv[icmd], &argv[icmd]);
exit(0);
}
}
memset(&sp, 0, sizeof(sp));
sp.sched_priority = priority;
if (sched_setscheduler(0, policy, &sp)) {
perror("sched_setscheduler");
if (expid > 0 && kill(-expid, SIGKILL))
perror("SIGKILL");
return 4;
}
signal(SIGINT, sig_int);
clock_getres(CLOCK_REALTIME, &ts1);
fprintf(stderr, "timeres=%ld\n", ts1.tv_nsec / 1000);
clock_gettime(CLOCK_REALTIME, &ts1);
cys = get_cycles();
sleep(1);
clock_gettime(CLOCK_REALTIME, &ts2);
cye = get_cycles();
mscycles = (cye - cys) / ((ts2.tv_sec - ts1.tv_sec) * 1000 + (ts2.tv_nsec - ts1.tv_nsec) / 1000000);
for (ii = 0; ii < numsamples && !stop_test; ii++) {
ts1.tv_sec = 0;
ts1.tv_nsec = sleeptime * 1000000;
cys = get_cycles();
clock_nanosleep(CLOCK_REALTIME, 0, &ts1, &ts2);
cye = get_cycles();
samples[ii] = (cye - cys) / mscycles;
if (samples[ii] > cylat)
cylat = samples[ii];
usleep(pausetime * 1000);
}
numsamples = ii;
memset(&sp, 0, sizeof(sp));
sp.sched_priority = 0;
if (sched_setscheduler(0, SCHED_OTHER, &sp)) {
perror("sched_setscheduler");
if (expid > 0 && kill(-expid, SIGKILL))
perror("SIGKILL");
return 6;
}
if (expid > 0 && kill(-expid, SIGKILL))
perror("SIGKILL");
for (ii = 0; ii < numsamples; ii++) {
}
fprintf(stdout, "maxlat=%llu\n", cylat);
return 0;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Dec 31 2001 - 21:00:14 EST