On Thursday 27 December 2001 23:44, Nathan Bryant wrote:
> Andris Pavenis wrote:
> >It still hanged machine after playing KDE startup sound. Didn't tried much
> >more and moved to my modified version of 0.12 which worked
>
> please send me your modified version again. full file would be best, not
> patch.
Got also my patched 0.12 freezing system later (kernel 2.4.17). Didn't saw
that earlier with 2.4.17-pre2. Also tried to move port I/O stuff from
__i810_update_lvi() to start_adc() and start_dac() inside if block to
avoid any possibility of doing wait loop when noting is done in start_dac()
and still get system locking up when loading driver. Perhaps I should
recheck with kernel 2.4.17-pre2 (I didn't have problems with it before
leaving to Finland now more than 2 weeks ago)
>
> i can't reproduce any problems here, so far, so i'm stabbing in the
> dark. if you can give more detailed information to reproduce, that would
> be nice: hardware versions, version of KDE, kde settings, (mine doesn't
> play a startup sound and artsd works fine for everything else i try),
> artsd settings. if i can reproduce, i can analyze on my own machine, if
> not, outlook is hazy ;-)
Kernel 2.4.17 compiled with gcc-2.95.3, devfs is enabled, ext3 filesystem (I
would prefer not to hang system with ext2, ext3 seems to
handle that nicely)
XFree86-4.1.99.2 (cvs update -r xf-4_1_99_2 xc; ....)
KDE-2.2.2 release (compiled here with gcc-2.95.3)
Contents of /proc/pci attached
KDE sound server settings:
Start aRts soundserver on KDE startup - on
Enable network transperancy - on
Exchange security and reference info over the X11 server - on
Run soundserver with realtime priority - off
Autosuspend if idle for 5 seconds
Display messages using artsmessage
Message display: errors
Sound I/O method: autodetect
Enable full duplex operation: off
Use custom sound device: off
Use custom sampling rate: off
Other custom options: off
Audio buffer size: 278 millisoconds (12 fragments with 4096 bytes)
I have setup to play one wav file from VFAT32 partition at KDE startup
Perhaps I'll look into that in next Year only. It seems I'll have to repeat
enabling debug output from i810_audio driver and to put additional output
there to see where I have the trouble.
Andris
This archive was generated by hypermail 2b29 : Mon Dec 31 2001 - 21:00:16 EST