Hello
I experience kernel panics whenever I turn on my computer[1] and the
RAID[2] on after they both where off. When resetting or power cycling the
computer alone it works fine afterwards.
This error occurs with two different external cables.
We had have similar errors a while before (also posted here) that occured
whenever a scsi tape was in use and never got a working fix. As we're using
the RAID systems on two other computers and never got it before buying the
dual cpu (but sadly not exactly but a couple of days after we installed the
new board) I suspect this to be the cause.
Any help appreciated!
thanks,
-christian-
[1]: PIII dual cpu
Gigabyte GA-6VTXD (with VIA Apollo chipset, latest BIOS version)
2GB ram
Adaptec 29160 (BIOS v3.10.0)
$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 06)
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:09.0 SCSI storage controller: Adaptec 7892A (rev 02)
00:0a.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
00:0b.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP (rev 27)
[2]: EasyRAID II external scsi raid with IDE disks running BIOS 2.5E
(scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
scsi0:A:0:0: Tagged Queuing enabled. Depth 253
scsi1: brkadrint, Scratch or SCB Memory Parity Error at seqaddr = 0x1
scsi1: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0
SCSISEQ = 0x12, SBLKCTL = 0x0
DFCNTRL = 0x4, DFSTATUS = 0x6d
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x5, SSTAT1 = 0x0
STACK == 0x17, 0x19b, 0x0, 0x0
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 2
QINFIFO entries: 2
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2
Pending list: 2
Kernel Free SCB list: 1 0
Untagged Q(1): 2
DevQ(0:1:0): 0 waiting
scsi1:0:1:0: Attempting to queue an ABORT message
scsi1: Dumping Card State in Data-out phase, at SEQADDR 0x0
ACCUM = 0x0, SINDEX = 0x0, DINDEX = 0x0, ARG_2 = 0x0
HCNT = 0x0
SCSISEQ = 0x0, SBLKCTL = 0xc0
DFCNTRL = 0x0, DFSTATUS = 0x29
LASTPHASE = 0x0, SCSISIGI = 0x0, SXFRCTL0 = 0x0
SSTAT0 = 0x0, SSTAT1 = 0x8
STACK == 0x0, 0x0, 0x0, 0x0
SCB count = 4
Kernel NEXTQSCB = 2
Card NEXTQSCB = 0
QINFIFO entries: 3 3
Waiting Queue entries: 0:255 1:255 2:255
Disconnected Queue entries: 0:255 1:255 2:255
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2
Pending list: 3
Kernel Free SCB list: 1 0
Untagged Q(1): 3
DevQ(0:1:0): 0 waiting
qinpos = 1, SCB index = 3
Kernel panic: Loop 1
--
Christian Hammers WESTEND GmbH - Aachen und Dueren Tel 0241/701333-0
ch@westend.com Internet & Security for Professionals Fax 0241/911879
WESTEND ist CISCO Systems Partner - Premium Certified
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Tue Jan 15 2002 - 21:00:45 EST