On Mon, Jan 21 2002, Vojtech Pavlik wrote:
> On Sun, Jan 20, 2002 at 04:12:36PM -0800, Andre Hedrick wrote:
>
> > > > > We only read out 4k thus the device has the the next 4k we may be wanting
> > > > > ready. Look at it as a dirty prefetch, but eventally the drive is going
> > > > > to want to go south, thus [lost interrupt]
> > > >
> > > > Even if the drive is programmed for 16 sectors in multi mode, it still
> > > > must honor lower transfer sizes. The fix I did was not to limit this,
> > > > but rather to only setup transfers for the amount of sectors in the
> > > > first chunk. This is indeed necessary now that we do not have a copy of
> > > > the request to fool around with.
> >
> > Listen and for just a second okay.
> >
> > Since the set multimode command is similar to the set transfer rate, if
> > you program the drive to run at U100 but the host can feed only U33 you
> > have problems. Much of this simple arguement is the same answer for
> > multimode.
> >
> > Same thing here but a variation, of the operations,
>
> So you're saying that if you program the drive to multimode 16, you
> can't read a single sector and always have to read 16? That not only
> doesn't make sense to me, but it also contradicts anything that I've
> heard before.
Well it didn't/doesn't make sense to me either, let me quote spec
though:
(READ_MULTIPLE)
"If the number of requested sectors is not evenly divisible by the block
count, as many full blocks as possible are transferred, followed by a
final, partial block transfer."
(block count being the multi setting here)
I actually misread this the first time around, it seems my original code
was indeed correct (and that 2.4 of course also is). For the example 24
sector request and multi mode of 16, the drive _will_ only expect 8
sectors in the final run. That makes sense to me again, I couldn't
understand the apparent brain damage in the model Andre suggested.
Time for a new patch...
-- Jens Axboe- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Wed Jan 23 2002 - 21:00:44 EST