On Wed, Jan 23, 2002 at 11:19:34AM +0100, Mario Mikocevic wrote:
> Hi,
>
> I would like to use i810 watchdog module (i810-tco).
>
> Upon modprobing I get ->
>
> kernel: i810 TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
Your motherboard is crap (sorry), it is has some magic ICH pin
wired to ground and so TCO timer is disabled.
>
> what should I do now ?
>
> - add some options to insmod ?
> - change some option in BIOS (I can't pinpoint any)
No.
> - change some jumper onboard ?
It is theoreticaly possible.
> - apply some patch ?
You can only patch your motherboard ;)
>
>
> driver is 0.03 posted on this list in Oct last year.
> Kernel is latest 2.4.x (currently 18-pre4).
>
> lspci ->
>
> # lspci
> 00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02)
> 00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801BAM PCI (rev 02)
> 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (ICH2) (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 02)
> 00:1f.2 USB Controller: Intel Corporation 82801BA(M) USB (Hub A) (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801BA(M) SMBus (rev 02)
> 00:1f.4 USB Controller: Intel Corporation 82801BA(M) USB (Hub B) (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801BA(M) AC'97 Audio (rev 02)
> 01:08.0 Ethernet controller: Intel Corporation 82801BA(M) Ethernet (rev 01)
>
> any other information available on request,
>
>
> TIA,
>
-- Andrey Panin | Embedded systems software engineer pazke@orbita1.ru | PGP key: wwwkeys.eu.pgp.net
This archive was generated by hypermail 2b29 : Wed Jan 23 2002 - 21:01:02 EST