Hello Sir

From: Lakshmikantha A.S (a_kantha@rediffmail.com)
Date: Tue Feb 05 2002 - 07:13:32 EST


Hello,
  I am a M.Sc(Computer Science ) student.Presently I am doing a project
of "Development of MPLS Based Router".
I am working on Cyrix MediaGXtm MMXtm MMX-S at 233MHz CPU with 128MB RAM on RedHat Linux7.1 on
Kernel-2.4.2-2. While installing Linux , the system is taken PentiumIII as Processor Type.but after adding the patch and made necessary changes given by the patch and compilation , the system didn't boot and gave the error like
Kernel panic:the system is compiled for pentium+
.........

then i changed the processor type to 586.then it booted properly.

I am using mpls-linux-0.990 for mplsadm utility.Now I enabled
all the 3 systems with mplsadm by adding the patch and compiling the
kernel and make mplsadm.

    Before using the mplsadm , 3 systems r pinging each other
and i was able to make FTP and telnet with all possible combination also.after I use mplsadm commands as given in example of mpls-linux-0.990 for 2 machines
, they r pinging each other.but when i give FTP or telnet to
remote system , the system in which i gave the ftp or telnet will
display the error like below and will hang.

[ 2 0r 3 lines r passed in previous screen.so i am not able to give it to u.]

  CPU:0
EIP:0010:[<c023aee2>]
EFLAGS:00010286
eax:0000001c ebx:07d58da0 ecx:00000001 edx:c0322cc4
esi:c7d58dc8 edi:c12b095c ebp:c0301dda esp:c5221b20

ds:0018 es :0018 ss:0018

Process syslogd (pid:498,stackpage=c5221000)

stack: c02f20cb co2f2340 0000006e c0278ff2 c1291960 0000000e c0278fea ffffffea

c011586e 00000286 00000001 c0388d56 00000002 c479c360 c12915f0 c0301d19

c02791f8 c1291960 c5c1f9e0 c479c360 c5c1f9e0 c12aad30 c12b0060 00000046

Call Trace : [<c02f20cb>] co2f2340 c0278ff2 co278fea c011586e c0301d19 c02791f8

c024fff6 c01c0f62 c0119715 c0261912 c025d14b co23afc6 co25f5co co25c08f

xxxxx xxxxx xxxxx

xxx xxx xxxxx xxx

Code : 0f 0b 83 c4 0c c3 a1 4c 12 39 c0 56 03 05 48 12 39 c0 53 85

Kernel panic:Aiee,killing interrupt handler!
In interrupt handler-not syncing.

-----------------------------------

 I tried with all possible combinations of 3 systems with 2 systems at a time.all the times i am getting the same error.but those numbers will change in different trials.

I tried for 5 or 6 times.I am getting the same problem.
So what may be the reason.Please do suggest some solutions for this.I
am waiting for solution.because without this I cant procced further.

SO help me .

With Regards,
Kantha.
  
 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Thu Feb 07 2002 - 21:00:41 EST