This patch reduces the binary size without losing any functionality. Its
mostly a cleanup patch. Admittedly there is a bit of variable renaming,
mainly because the previous names weren't relevant anymore.
2.4.18-pre8 Non-PnP
text data bss dec hex filename
6514 384 384 7282 1c72 drivers/sound/opl3sa2.o
2.4.18-pre8 + patch Non-PnP
text data bss dec hex filename
5594 420 320 6334 18be drivers/sound/opl3sa2.o
2.4.18-pre8 PnP
text data bss dec hex filename
7746 448 1216 9410 24c2 drivers/sound/opl3sa2.o
2.4.18-pre8 + patch PnP
text data bss dec hex filename
6602 448 1152 8202 200a drivers/sound/opl3sa2.o
--- linux-2.4.18-pre8/drivers/sound/opl3sa2.c.orig Wed Feb 13 22:46:15 2002
+++ linux-2.4.18-pre8/drivers/sound/opl3sa2.c Thu Feb 14 07:06:07 2002
@@ -56,6 +56,7 @@
* Scott Murray Some small cleanups to the init code output.
* (Jan 7, 2001)
* Zwane Mwaikambo Added PM support. (Dec 4 2001)
+ * Zwane Mwaikambo Code, data structure cleanups. (Feb 13 2002)
*
*/
@@ -70,6 +71,7 @@
#include "mpu401.h"
#define OPL3SA2_MODULE_NAME "opl3sa2"
+#define PFX OPL3SA2_MODULE_NAME ": "
/* Useful control port indexes: */
#define OPL3SA2_PM 0x01
@@ -107,6 +109,7 @@
#define CHIPSET_UNKNOWN -1
#define CHIPSET_OPL3SA2 0
#define CHIPSET_OPL3SA3 1
+static const char *CHIPSET_TABLE[] = {"OPL3-SA2", "OPL3-SA3"};
#if defined CONFIG_ISAPNP || defined CONFIG_ISAPNP_MODULE
#define OPL3SA2_CARDS_MAX 4
@@ -117,38 +120,38 @@
/* This should be pretty obvious */
static int opl3sa2_cards_num; /* = 0 */
-/* What's my version(s)? */
-static int chipset[OPL3SA2_CARDS_MAX] = { CHIPSET_UNKNOWN };
-
-/* Oh well, let's just cache the name(s) */
-static char chipset_name[OPL3SA2_CARDS_MAX][12];
-
-/* Where's my mixer(s)? */
-static int opl3sa2_mixer[OPL3SA2_CARDS_MAX] = { -1 };
-
-/* Bag o' mixer data */
-typedef struct opl3sa2_mixerdata_tag {
+typedef struct {
+ /* device resources */
unsigned short cfg_port;
- unsigned short padding;
- unsigned char pm_reg;
- unsigned int in_suspend;
- struct pm_dev *pmdev;
- unsigned int card;
- unsigned int volume_l;
- unsigned int volume_r;
- unsigned int mic;
- unsigned int bass_l;
- unsigned int bass_r;
- unsigned int treble_l;
- unsigned int treble_r;
- unsigned int wide_l;
- unsigned int wide_r;
-} opl3sa2_mixerdata;
-static opl3sa2_mixerdata opl3sa2_data[OPL3SA2_CARDS_MAX];
-
-static struct address_info cfg[OPL3SA2_CARDS_MAX];
-static struct address_info cfg_mss[OPL3SA2_CARDS_MAX];
-static struct address_info cfg_mpu[OPL3SA2_CARDS_MAX];
+ struct address_info cfg;
+ struct address_info cfg_mss;
+ struct address_info cfg_mpu;
+
+#if defined CONFIG_ISAPNP || defined CONFIG_ISAPNP_MODULE
+ /* PnP Stuff */
+ struct pci_dev* pdev;
+ int activated; /* Whether said devices have been activated */
+#endif
+ unsigned char pm_reg;
+ unsigned int in_suspend;
+ struct pm_dev *pmdev;
+ unsigned int card;
+ int chipset; /* What's my version(s)? */
+ char *chipset_name;
+
+ /* mixer data */
+ int mixer;
+ unsigned int volume_l;
+ unsigned int volume_r;
+ unsigned int mic;
+ unsigned int bass_l;
+ unsigned int bass_r;
+ unsigned int treble_l;
+ unsigned int treble_r;
+ unsigned int wide_l;
+ unsigned int wide_r;
+} opl3sa2_state_t;
+static opl3sa2_state_t opl3sa2_state[OPL3SA2_CARDS_MAX];
/* Our parameters */
static int __initdata io = -1;
@@ -165,11 +168,6 @@
static int __initdata isapnp = 1;
static int __initdata multiple = 1;
-/* PnP devices */
-struct pci_dev* opl3sa2_dev[OPL3SA2_CARDS_MAX];
-
-/* Whether said devices have been activated */
-static int opl3sa2_activated[OPL3SA2_CARDS_MAX];
#else
static int __initdata isapnp; /* = 0 */
static int __initdata multiple; /* = 0 */
@@ -239,7 +237,7 @@
* All of the mixer functions...
*/
-static void opl3sa2_set_volume(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa2_set_volume(opl3sa2_state_t* devc, int left, int right)
{
static unsigned char scale[101] = {
0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0e, 0x0e, 0x0e,
@@ -274,7 +272,7 @@
}
-static void opl3sa2_set_mic(opl3sa2_mixerdata* devc, int level)
+static void opl3sa2_set_mic(opl3sa2_state_t* devc, int level)
{
unsigned char vol = 0x1F;
@@ -289,7 +287,7 @@
}
-static void opl3sa3_set_bass(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_bass(opl3sa2_state_t* devc, int left, int right)
{
unsigned char bass;
@@ -300,7 +298,7 @@
}
-static void opl3sa3_set_treble(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_treble(opl3sa2_state_t* devc, int left, int right)
{
unsigned char treble;
@@ -311,7 +309,7 @@
}
-static void opl3sa3_set_wide(opl3sa2_mixerdata* devc, int left, int right)
+static void opl3sa3_set_wide(opl3sa2_state_t* devc, int left, int right)
{
unsigned char wide;
@@ -322,7 +320,7 @@
}
-static void opl3sa2_mixer_reset(opl3sa2_mixerdata* devc, int card)
+static void opl3sa2_mixer_reset(opl3sa2_state_t* devc, int card)
{
if(devc) {
opl3sa2_set_volume(devc, DEFAULT_VOLUME, DEFAULT_VOLUME);
@@ -331,7 +329,7 @@
opl3sa2_set_mic(devc, DEFAULT_MIC);
devc->mic = DEFAULT_MIC;
- if(chipset[card] == CHIPSET_OPL3SA3) {
+ if(devc->chipset == CHIPSET_OPL3SA3) {
opl3sa3_set_bass(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
devc->bass_l = devc->bass_r = DEFAULT_TIMBRE;
opl3sa3_set_treble(devc, DEFAULT_TIMBRE, DEFAULT_TIMBRE);
@@ -341,13 +339,13 @@
}
-static void opl3sa2_mixer_restore(opl3sa2_mixerdata* devc, int card)
+static void opl3sa2_mixer_restore(opl3sa2_state_t* devc, int card)
{
if (devc) {
opl3sa2_set_volume(devc, devc->volume_l, devc->volume_r);
opl3sa2_set_mic(devc, devc->mic);
- if (chipset[card] == CHIPSET_OPL3SA3) {
+ if (devc->chipset == CHIPSET_OPL3SA3) {
opl3sa3_set_bass(devc, devc->bass_l, devc->bass_r);
opl3sa3_set_treble(devc, devc->treble_l, devc->treble_r);
}
@@ -389,7 +387,7 @@
{
int cmdf = cmd & 0xff;
- opl3sa2_mixerdata* devc = (opl3sa2_mixerdata*) mixer_devs[dev]->devc;
+ opl3sa2_state_t* devc = (opl3sa2_state_t *) mixer_devs[dev]->devc;
switch(cmdf) {
case SOUND_MIXER_VOLUME:
@@ -472,7 +470,7 @@
{
int cmdf = cmd & 0xff;
- opl3sa2_mixerdata* devc = (opl3sa2_mixerdata*) mixer_devs[dev]->devc;
+ opl3sa2_state_t* devc = (opl3sa2_state_t *) mixer_devs[dev]->devc;
switch(cmdf) {
case SOUND_MIXER_BASS:
@@ -615,7 +613,7 @@
AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);
}
else {
- printk(KERN_ERR "opl3sa2: MSS mixer not installed?\n");
+ printk(KERN_ERR PFX "MSS mixer not installed?\n");
}
}
}
@@ -632,13 +630,12 @@
unsigned char misc;
unsigned char tmp;
unsigned char version;
- char tag;
/*
* Try and allocate our I/O port range.
*/
if(!request_region(hw_config->io_base, 2, OPL3SA2_MODULE_NAME)) {
- printk(KERN_ERR "opl3sa2: Control I/O port %#x not free\n",
+ printk(KERN_ERR PFX "Control I/O port %#x not free\n",
hw_config->io_base);
return 0;
}
@@ -651,7 +648,7 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc ^ 0x07);
opl3sa2_read(hw_config->io_base, OPL3SA2_MISC, &tmp);
if(tmp != misc) {
- printk(KERN_ERR "opl3sa2: Control I/O port %#x is not a YMF7xx chipset!\n",
+ printk(KERN_ERR PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
return 0;
}
@@ -664,7 +661,7 @@
opl3sa2_read(hw_config->io_base, OPL3SA2_MIC, &tmp);
if((tmp & 0x9f) != 0x8a) {
printk(KERN_ERR
- "opl3sa2: Control I/O port %#x is not a YMF7xx chipset!\n",
+ PFX "Control I/O port %#x is not a YMF7xx chipset!\n",
hw_config->io_base);
return 0;
}
@@ -677,47 +674,43 @@
* of the miscellaneous register.
*/
version = misc & 0x07;
- printk(KERN_DEBUG "opl3sa2: chipset version = %#x\n", version);
+ printk(KERN_DEBUG PFX "chipset version = %#x\n", version);
switch(version) {
case 0:
- chipset[card] = CHIPSET_UNKNOWN;
- tag = '?'; /* silence compiler warning */
+ opl3sa2_state[card].chipset = CHIPSET_UNKNOWN;
printk(KERN_ERR
- "opl3sa2: Unknown Yamaha audio controller version\n");
+ PFX "Unknown Yamaha audio controller version\n");
break;
case VERSION_YMF711:
- chipset[card] = CHIPSET_OPL3SA2;
- tag = '2';
- printk(KERN_INFO "opl3sa2: Found OPL3-SA2 (YMF711)\n");
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA2;
+ printk(KERN_INFO PFX "Found OPL3-SA2 (YMF711)\n");
break;
case VERSION_YMF715:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715 or YMF719)\n");
+ PFX "Found OPL3-SA3 (YMF715 or YMF719)\n");
break;
case VERSION_YMF715B:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715B or YMF719B)\n");
+ PFX "Found OPL3-SA3 (YMF715B or YMF719B)\n");
break;
case VERSION_YMF715E:
default:
- chipset[card] = CHIPSET_OPL3SA3;
- tag = '3';
+ opl3sa2_state[card].chipset = CHIPSET_OPL3SA3;
printk(KERN_INFO
- "opl3sa2: Found OPL3-SA3 (YMF715E or YMF719E)\n");
+ PFX "Found OPL3-SA3 (YMF715E or YMF719E)\n");
break;
}
- if(chipset[card] != CHIPSET_UNKNOWN) {
+ if(opl3sa2_state[card].chipset != CHIPSET_UNKNOWN) {
/* Generate a pretty name */
- sprintf(chipset_name[card], "OPL3-SA%c", tag);
+ opl3sa2_state[card].chipset_name =
+ (char *)CHIPSET_TABLE[opl3sa2_state[card].chipset];
return 1;
}
return 0;
@@ -745,29 +738,27 @@
static void __init attach_opl3sa2_mixer(struct address_info *hw_config, int card)
{
struct mixer_operations* mixer_operations;
- opl3sa2_mixerdata* devc;
+ opl3sa2_state_t* devc = &opl3sa2_state[card];
/* Install master mixer */
- if(chipset[card] == CHIPSET_OPL3SA3) {
+ if(devc->chipset == CHIPSET_OPL3SA3) {
mixer_operations = &opl3sa3_mixer_operations;
}
else {
mixer_operations = &opl3sa2_mixer_operations;
}
- if((devc = &opl3sa2_data[card])) {
- devc->cfg_port = hw_config->io_base;
-
- opl3sa2_mixer[card] = sound_install_mixer(MIXER_DRIVER_VERSION,
- mixer_operations->name,
- mixer_operations,
- sizeof(struct mixer_operations),
- devc);
- if(opl3sa2_mixer[card] < 0) {
- printk(KERN_ERR "opl3sa2: Could not install %s master mixer\n",
- mixer_operations->name);
- }
- else
+ devc->cfg_port = hw_config->io_base;
+ devc->mixer = sound_install_mixer(MIXER_DRIVER_VERSION,
+ mixer_operations->name,
+ mixer_operations,
+ sizeof(struct mixer_operations),
+ devc);
+ if(devc->mixer < 0) {
+ printk(KERN_ERR PFX "Could not install %s master mixer\n",
+ mixer_operations->name);
+ }
+ else {
opl3sa2_mixer_reset(devc, card);
}
}
@@ -802,7 +793,7 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_SYS_CTRL, sys_ctrl);
}
else {
- printk(KERN_ERR "opl3sa2: not setting ymode, it must be one of 0,1,2,3\n");
+ printk(KERN_ERR PFX "not setting ymode, it must be one of 0,1,2,3\n");
}
}
@@ -817,7 +808,7 @@
opl3sa2_write(hw_config->io_base, OPL3SA2_MISC, misc);
}
else {
- printk(KERN_ERR "opl3sa2: not setting loopback, it must be either 0 or 1\n");
+ printk(KERN_ERR PFX "not setting loopback, it must be either 0 or 1\n");
}
}
@@ -828,8 +819,8 @@
release_region(hw_config->io_base, 2);
/* Unload mixer */
- if(opl3sa2_mixer[card] >= 0)
- sound_unload_mixerdev(opl3sa2_mixer[card]);
+ if(opl3sa2_state[card].mixer >= 0)
+ sound_unload_mixerdev(opl3sa2_state[card].mixer);
}
@@ -867,21 +858,21 @@
*/
ret = dev->prepare(dev);
if(ret && ret != -EBUSY) {
- printk(KERN_ERR "opl3sa2: ISA PnP found device that could not be autoconfigured.\n");
+ printk(KERN_ERR PFX "ISA PnP found device that could not be autoconfigured.\n");
return -ENODEV;
}
if(ret == -EBUSY) {
- opl3sa2_activated[card] = 1;
+ opl3sa2_state[card].activated = 1;
}
else {
if(dev->activate(dev) < 0) {
- printk(KERN_WARNING "opl3sa2: ISA PnP activate failed\n");
- opl3sa2_activated[card] = 0;
+ printk(KERN_WARNING PFX "ISA PnP activate failed\n");
+ opl3sa2_state[card].activated = 0;
return -ENODEV;
}
printk(KERN_DEBUG
- "opl3sa2: Activated ISA PnP card %d (active=%d)\n",
+ PFX "Activated ISA PnP card %d (active=%d)\n",
card, dev->active);
}
@@ -910,7 +901,7 @@
opl3sa2_clear_slots(mss_cfg);
opl3sa2_clear_slots(mpu_cfg);
- opl3sa2_dev[card] = dev;
+ opl3sa2_state[card].pdev = dev;
return 0;
}
@@ -922,7 +913,7 @@
static int opl3sa2_suspend(struct pm_dev *pdev, unsigned char pm_mode)
{
unsigned long flags;
- opl3sa2_mixerdata *p;
+ opl3sa2_state_t *p;
if (!pdev)
return -EINVAL;
@@ -930,7 +921,7 @@
save_flags(flags);
cli();
- p = (opl3sa2_mixerdata *) pdev->data;
+ p = (opl3sa2_state_t *) pdev->data;
switch (pm_mode) {
case 1:
@@ -962,12 +953,12 @@
static int opl3sa2_resume(struct pm_dev *pdev)
{
unsigned long flags;
- opl3sa2_mixerdata *p;
+ opl3sa2_state_t *p;
if (!pdev)
return -EINVAL;
- p = (opl3sa2_mixerdata *) pdev->data;
+ p = (opl3sa2_state_t *) pdev->data;
save_flags(flags);
cli();
@@ -1016,16 +1007,14 @@
* should still be able to disable PNP support for this
* single driver!
*/
- if(isapnp && opl3sa2_isapnp_probe(&cfg[card],
- &cfg_mss[card],
- &cfg_mpu[card],
+ if(isapnp && opl3sa2_isapnp_probe(&opl3sa2_state[card].cfg,
+ &opl3sa2_state[card].cfg_mss,
+ &opl3sa2_state[card].cfg_mpu,
card) < 0) {
- if(!opl3sa2_cards_num)
- printk(KERN_INFO "opl3sa2: No PnP cards found\n");
if(io == -1)
break;
isapnp=0;
- printk(KERN_INFO "opl3sa2: Search for a card at 0x%d.\n", io);
+ printk(KERN_INFO PFX "Search for a card at 0x%d.\n", io);
/* Fall through */
}
#endif
@@ -1035,7 +1024,7 @@
if(io == -1 || irq == -1 || dma == -1 ||
dma2 == -1 || mss_io == -1) {
printk(KERN_ERR
- "opl3sa2: io, mss_io, irq, dma, and dma2 must be set\n");
+ PFX "io, mss_io, irq, dma, and dma2 must be set\n");
return -EINVAL;
}
@@ -1044,31 +1033,31 @@
* (NOTE: IRQ and DMA aren't used, so they're set to
* give pretty output from conf_printf. :)
*/
- cfg[card].io_base = io;
- cfg[card].irq = irq;
- cfg[card].dma = dma;
- cfg[card].dma2 = dma2;
+ opl3sa2_state[card].cfg.io_base = io;
+ opl3sa2_state[card].cfg.irq = irq;
+ opl3sa2_state[card].cfg.dma = dma;
+ opl3sa2_state[card].cfg.dma2 = dma2;
/* The MSS config: */
- cfg_mss[card].io_base = mss_io;
- cfg_mss[card].irq = irq;
- cfg_mss[card].dma = dma;
- cfg_mss[card].dma2 = dma2;
- cfg_mss[card].card_subtype = 1; /* No IRQ or DMA setup */
-
- cfg_mpu[card].io_base = mpu_io;
- cfg_mpu[card].irq = irq;
- cfg_mpu[card].dma = -1;
- cfg_mpu[card].always_detect = 1; /* Use shared IRQs */
+ opl3sa2_state[card].cfg_mss.io_base = mss_io;
+ opl3sa2_state[card].cfg_mss.irq = irq;
+ opl3sa2_state[card].cfg_mss.dma = dma;
+ opl3sa2_state[card].cfg_mss.dma2 = dma2;
+ opl3sa2_state[card].cfg_mss.card_subtype = 1; /* No IRQ or DMA setup */
+
+ opl3sa2_state[card].cfg_mpu.io_base = mpu_io;
+ opl3sa2_state[card].cfg_mpu.irq = irq;
+ opl3sa2_state[card].cfg_mpu.dma = -1;
+ opl3sa2_state[card].cfg_mpu.always_detect = 1; /* Use shared IRQs */
/* Call me paranoid: */
- opl3sa2_clear_slots(&cfg[card]);
- opl3sa2_clear_slots(&cfg_mss[card]);
- opl3sa2_clear_slots(&cfg_mpu[card]);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mss);
+ opl3sa2_clear_slots(&opl3sa2_state[card].cfg_mpu);
}
- if(!probe_opl3sa2(&cfg[card], card) ||
- !probe_opl3sa2_mss(&cfg_mss[card])) {
+ if(!probe_opl3sa2(&opl3sa2_state[card].cfg, card) ||
+ !probe_opl3sa2_mss(&opl3sa2_state[card].cfg_mss)) {
/*
* If one or more cards are already registered, don't
* return an error but print a warning. Note, this
@@ -1077,7 +1066,7 @@
*/
if(opl3sa2_cards_num) {
printk(KERN_WARNING
- "opl3sa2: There was a problem probing one "
+ PFX "There was a problem probing one "
" of the ISA PNP cards, continuing\n");
opl3sa2_cards_num--;
continue;
@@ -1085,47 +1074,48 @@
return -ENODEV;
}
- attach_opl3sa2(&cfg[card], card);
- conf_printf(chipset_name[card], &cfg[card]);
- attach_opl3sa2_mss(&cfg_mss[card]);
- attach_opl3sa2_mixer(&cfg[card], card);
+ attach_opl3sa2(&opl3sa2_state[card].cfg, card);
+ conf_printf(opl3sa2_state[card].chipset_name, &opl3sa2_state[card].cfg);
+ attach_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
+ attach_opl3sa2_mixer(&opl3sa2_state[card].cfg, card);
- opl3sa2_data[card].card = card;
+ /* ewww =) */
+ opl3sa2_state[card].card = card;
/* register our power management capabilities */
- opl3sa2_data[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
- if (opl3sa2_data[card].pmdev)
- opl3sa2_data[card].pmdev->data = &opl3sa2_data[card];
+ opl3sa2_state[card].pmdev = pm_register(PM_ISA_DEV, card, opl3sa2_pm_callback);
+ if (opl3sa2_state[card].pmdev)
+ opl3sa2_state[card].pmdev->data = &opl3sa2_state[card];
/*
* Set the Yamaha 3D enhancement mode (aka Ymersion) if asked to and
* it's supported.
*/
if(ymode != -1) {
- if(chipset[card] == CHIPSET_OPL3SA2) {
+ if(opl3sa2_state[card].chipset == CHIPSET_OPL3SA2) {
printk(KERN_ERR
- "opl3sa2: ymode not supported on OPL3-SA2\n");
+ PFX "ymode not supported on OPL3-SA2\n");
}
else {
- opl3sa2_set_ymode(&cfg[card], ymode);
+ opl3sa2_set_ymode(&opl3sa2_state[card].cfg, ymode);
}
}
/* Set A/D input to Mono loopback if asked to. */
if(loopback != -1) {
- opl3sa2_set_loopback(&cfg[card], loopback);
+ opl3sa2_set_loopback(&opl3sa2_state[card].cfg, loopback);
}
/* Attach MPU if we've been asked to do so */
- if(cfg_mpu[card].io_base != -1) {
- if(probe_opl3sa2_mpu(&cfg_mpu[card])) {
- attach_opl3sa2_mpu(&cfg_mpu[card]);
+ if(opl3sa2_state[card].cfg_mpu.io_base != -1) {
+ if(probe_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu)) {
+ attach_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
}
}
}
if(isapnp) {
- printk(KERN_NOTICE "opl3sa2: %d PnP card(s) found.\n", opl3sa2_cards_num);
+ printk(KERN_NOTICE PFX "%d PnP card(s) found.\n", opl3sa2_cards_num);
}
return 0;
@@ -1140,22 +1130,22 @@
int card;
for(card = 0; card < opl3sa2_cards_num; card++) {
- if (opl3sa2_data[card].pmdev)
- pm_unregister(opl3sa2_data[card].pmdev);
+ if (opl3sa2_state[card].pmdev)
+ pm_unregister(opl3sa2_state[card].pmdev);
- if(cfg_mpu[card].slots[1] != -1) {
- unload_opl3sa2_mpu(&cfg_mpu[card]);
+ if(opl3sa2_state[card].cfg_mpu.slots[1] != -1) {
+ unload_opl3sa2_mpu(&opl3sa2_state[card].cfg_mpu);
}
- unload_opl3sa2_mss(&cfg_mss[card]);
- unload_opl3sa2(&cfg[card], card);
+ unload_opl3sa2_mss(&opl3sa2_state[card].cfg_mss);
+ unload_opl3sa2(&opl3sa2_state[card].cfg, card);
#if defined CONFIG_ISAPNP || defined CONFIG_ISAPNP_MODULE
- if(opl3sa2_activated[card] && opl3sa2_dev[card]) {
- opl3sa2_dev[card]->deactivate(opl3sa2_dev[card]);
+ if(opl3sa2_state[card].activated && opl3sa2_state[card].pdev) {
+ opl3sa2_state[card].pdev->deactivate(opl3sa2_state[card].pdev);
printk(KERN_DEBUG
- "opl3sa2: Deactivated ISA PnP card %d (active=%d)\n",
- card, opl3sa2_dev[card]->active);
+ PFX "Deactivated ISA PnP card %d (active=%d)\n",
+ card, opl3sa2_state[card].pdev->active);
}
#endif
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Feb 15 2002 - 21:01:00 EST