Thus Spake Jeff Garzik:
>I agree to the first part :)
>
>Set cache line size just like drivers/net/acenic.c does, and enable
>memory-write-invalidate...
>
Ok, hopefully below is the section you were referring to:
-------
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cls);
cls <<= 2;
if (cls != SMP_CACHE_BYTES) {
printk(KERN_INFO " PCI cache line size set incorrectly "
"(%i bytes) by BIOS/FW, ", cls);
if (cls > SMP_CACHE_BYTES)
printk("expecting %i\n", SMP_CACHE_BYTES);
else {
printk("correcting to %i\n", SMP_CACHE_BYTES);
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
SMP_CACHE_BYTES >> 2);
}
}
pci_read_config_word (pdev, PCI_COMMAND, &pcr);
/* Turn off Fast B2B enable */
pcr &= ~PCI_COMMAND_FAST_BACK;
/* Turn on SERR# enable and others */
pcr |= (PCI_COMMAND_SERR | PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
pci_write_config_word (pdev, PCI_COMMAND, pcr);
pci_read_config_word (pdev, PCI_COMMAND, &pcr);
------
Out of curiosity, does it in fact make sense to use memory write and
invalidate and set cache line size to 0 in some cases? This seems to go
against the PCI spec, which, if I'm reading it correctly, says that memory
write and invalidate is the same as a memory write, but it guarantees that
at least 1 cache line will be written. So, setting cacheline size =0 would
negate this effect(?)
Kent
>
> Jeff
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Thu Mar 07 2002 - 21:00:35 EST