ACPI hangs on boot with K7SEM MoBo and Adaptec SCSI card

• Next message: Brian Gerst: "Re: PnP BIOS driver status"
• Previous message: Alan Cox: "Linux 2.2.21pre4"
• Next in thread: Justin Cormack: "Re: ACPI hangs on boot with K7SEM MoBo and Adaptec SCSI card"
• Reply: Justin Cormack: "Re: ACPI hangs on boot with K7SEM MoBo and Adaptec SCSI card"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi,

I just got ECS K7SEM motherboard. ACPI power saving is enabled in BIOS
and works in linux (at least halt turns the box off). However when I
plug in Adaptec SCSI (2940AU) the machine hangs during boot after
loading ACPI core subsystem. The last message is:
ACPI: core subsystem version [20011018]

I have 2.4.19-pre2-ac3 with both ACPI and APM compiled in. I am booting
with apm=off (otherwise acpi does not load).

It's not really critical, since apm works too. I just thought I would
have access to all the acpi goodies like temperature of the CPU.

                                                Take care, Petr

-- 
No chinese, no fortune.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

• Next message: Brian Gerst: "Re: PnP BIOS driver status"
• Previous message: Alan Cox: "Linux 2.2.21pre4"
• Next in thread: Justin Cormack: "Re: ACPI hangs on boot with K7SEM MoBo and Adaptec SCSI card"
• Reply: Justin Cormack: "Re: ACPI hangs on boot with K7SEM MoBo and Adaptec SCSI card"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Fri Mar 15 2002 - 22:00:11 EST