On Wed, 13 Mar 2002 15:58:29 GMT, Jonathan H N Chin wrote:
>> > i have a new laptop (Dell Latitude C610) running 2.4.18-rc4. when i built the
>> > new kernel, i thought i would amuse myself by turning on IO-APIC.
>
>> "Don't do that" 8-)
>
>
>Unfortunately, at least on my C800 here, not using it breaks IEEE1394:
>
> kernel: ohci1394_0: Waking dma ctx=2 ... processing is probably too slow
>
>and communication breaks down shortly after (have to unload/reload the
>modules to make it work again). On the other hand, with IO-APIC + Local
>APIC enabled (APM and ACPI disabled) firewire works fine.
Your C800 works with local APIC enabled if APM is disabled? Cool.
This indicates that the DMI blacklisting rules in my dmi-apic-fixups
patch should be relaxed to permit local APIC use on Dell laptops,
IF APM is disabled in the BIOS. There's already a rule for that
(used for the MSI-6163 mb) so it's a trivial change.
/Mikael
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Fri Mar 15 2002 - 22:00:15 EST