On Mon, 25 Mar 2002, Wakko Warner wrote:
> > > The way you say that makes me think that it does support at some other
> > > level... hot swap controller? Doesn't match MY hardware. Hot swap
> >
> > Controller level hotswap works mostly (think about pcmcia ide for example)
>
> Just to throw this out there. Is it possible to make the ide subsystem look
> like a scsi controller ? that way the scsi layer could insert/remove
> devices. say: ide0/1 = scsi0 (assuming no other scsi controllers) and hda =
> scsi0 channel0 id0 lun0 and hdc = scsi0 channel1 id0 lun0 ...
>
> Personally, if it's doable, i'd like it.
Hardware is different.
You can paint a goose yellow and call it a duck, but it is still a goose.
The electrical/electronic interface will kill you!
Cheers,
Andre Hedrick
LAD Storage Consulting Group
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Sun Mar 31 2002 - 22:00:10 EST