Re: Oops in 2.4.18 - opl3sa2 related?

From: Zwane Mwaikambo (zwane@linux.realnet.co.sz)
Date: Mon Apr 08 2002 - 06:00:03 EST

Next message: Zwane Mwaikambo: "Re: 2.4.18 AND Geode GX1/200Mhz problem"
Previous message: Pavel Machek: "Re: Make swsusp actually work"
In reply to: brian@schau.dk: "Oops in 2.4.18 - opl3sa2 related?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 8 Apr 2002 brian@schau.dk wrote:

> It happens if I do a cat /proc/ioports after a modprobe opl3sa2 io=0x370 mss_io=0x530 mpu_io=0x330 irq=5 dma=0 dma2=1
>
>
> What to do now? Will upgrading help?

Thanks for the bugreport, be sure to CC me for opl3sa2 issues. I can check
further and see where its dying. You can try running the latest -pre or
newer -ac (careful about Alan's *fun* bits though ;) as that has a
slightly updated version. I'm running 2.4.19-pre2-ac3 and can safely cat
/proc/ioports.

Cheers,
Zwane

-- http://function.linuxpower.ca

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/

Next message: Zwane Mwaikambo: "Re: 2.4.18 AND Geode GX1/200Mhz problem"
Previous message: Pavel Machek: "Re: Make swsusp actually work"
In reply to: brian@schau.dk: "Oops in 2.4.18 - opl3sa2 related?"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This archive was generated by hypermail 2b29 : Mon Apr 15 2002 - 22:00:10 EST