Andreas Dilger writes:
> On Apr 10, 2002 09:33 -0600, Richard Gooch wrote:
> > Even though I'm using persistent superblockss, which is supposed to
> > allow one to move devices from one controller to another, I can't
> > use my RAID) set in this configuration. Looks like a bug.
> >
> > md0: former device scsi/host2/bus0/target1/lun0/part2 is unavailable, removing from array!
> > md: md0, array needs 6 disks, has 5, aborting.
>
> Note that this appears to be your real problem.
No. I tested all 6 partitions used in the RAID set. They are all
available.
> > Note the following line from the kernel logs above:
> > md: can not import scsi/host6/bus0/target0/lun0/part2, has active inodes!
> >
> > Well, that's no surprise, as this partition has /usr! And this
> > partition isn't even mentioned in the /etc/raidtab file. But I note
> > that it has the same device number in this (the broken) configuration
> > as /dev/sd/c0b0t1u0p2 has in the working configuration.
>
> That is a red herring, I think.
Then what *is* the problem?
Regards,
Richard....
Permanent: rgooch@atnf.csiro.au
Current: rgooch@ras.ucalgary.ca
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
This archive was generated by hypermail 2b29 : Mon Apr 15 2002 - 22:00:16 EST