Re: [PATCH] IDE TCQ #4

From: Martin Dalecki (dalecki@evision-ventures.com)
Date: Thu Apr 18 2002 - 06:20:15 EST


Sebastian Droege wrote:
> On Wed, 17 Apr 2002 12:42:39 +0200
> Martin Dalecki <dalecki@evision-ventures.com> wrote:
>
>
>>>2.
>>>when I cat /proc/ide/ide1/hdc/identify I get 2 unexpected interrupts
>>>hdc and hdd are both cdrom drives (accessed via scsi-emulation if relevant)
>>
>> > but the problem shows up only with hdc
>>
>>Duh oh... This is actually a good hint. I will look after
>>this.
>>
>>
>>>and maybe a third problem ;)
>>>in /proc/ide/ide0/hda/tcq there is written:
>>>DMA status: not running
>>
>>This is harmless it just shows that there was no DMA transfer in flight the
>>time you have cat-ed this file.
>>
>>
>>>but DMA is explicitly enabled by hdparm and shows up in /proc/ide/ide0/hda/settings
>>>
>>>I'll do some more testings later the day
>>
> Hi again,
> after some playing with hdparm I found something bad :(
>
> ide_tcq_intr_timeout: timeout waiting for interrupt
> ide_tcq_intr_timeout: hwgroup not busy
> hda: invalidating pending queue
> ide_tcq_invalidate_queue: done
>
> and then... nothing works anymore -> total lockup of the IDE system
> This happens only (?) when I put hdparm -qa1 -qA1 -qc1 -qd1 -qm16 -qu1 -qW1 /dev/hda (the same with hdb) in my bootscripts
> When I start hdparm later everything works fine first, but after a while (and when I'm under X) the IDE system is crashed
>
> I have enabled following options:
> CONFIG_BLK_DEV_IDE_TCQ=y
> CONFIG_BLK_DEV_IDE_TCQ_FULL=y
> CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
> CONFIG_BLK_DEV_IDE_TCQ_DEPTH=32
>
> I hope this helps somehow but I don't know what further informations I can provide
>
> BTW: I think we should create devfs entries for ide-scsi devices (because hdparm doesn't take scdX ;) )
>
> Bye

I don't know whatever you have already tryed the recend patches for 2.5.8.
The problem in place is presumably fixed there (tough there are still
problems with ide-cd remaining which I'm working on right now.)

BTW> Jens: Do you have any idea what the "sector chaing" in ide-cd is
good for?! I would love to just get rid of it alltogether!

-- 
- phone: +49 214 8656 283
- job:   eVision-Ventures AG, LEV .de (MY OPINIONS ARE MY OWN!)
- langs: de_DE.ISO8859-1, en_US, pl_PL.ISO8859-2, last ressort: ru_RU.KOI8-R

- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Apr 23 2002 - 22:00:21 EST