RE: 48-bit IDE [Re: 160gb disk showing up as 137gb]

From: Andre Hedrick (andre@linux-ide.org)
Date: Sat Apr 27 2002 - 16:33:08 EST


No, you need a host that is capable of 48-bit command set operations.
Only a few hosts fail to support the double pump of the taskfile
registers, and it requires a control register for high ordered bit
operations.

cheers,

Andre Hedrick
LAD Storage Consulting Group

On Sat, 27 Apr 2002, Kevin Krieser wrote:

> You need an IDE controller that supports ATA133. For most existing
> computers, that is going to require a new card.-----Original Message-----
>
>
> From: linux-kernel-owner@vger.kernel.org
> [mailto:linux-kernel-owner@vger.kernel.org]On Behalf Of Ville Herva
> Sent: Saturday, April 27, 2002 7:56 AM
> To: Martin Bene; linux-kernel@vger.kernel.org
> Subject: 48-bit IDE [Re: 160gb disk showing up as 137gb]
>
>
> On Sat, Apr 27, 2002 at 12:16:06PM +0200, you [Martin Bene] wrote:
> >
> > IDE: The kernel IDE driver needs to support 48-bit addresseing to support
> > 160GB.
> >
> > (...) however, you can do something about the linux ATA driver: code
> > is in the 2.4.19-pre tree, it went in with 2.4.19-pre3.
>
> But which IDE controllers support 48-bit addressing? Not all of them? Does
> linux IDE driver support 48-bit for all of them? Do they require BIOS
> upgrade in order to operate 48-bit?
>
> Or can I just grab a 160GB Maxtor and 2.4.19-preX, stick them into whatever
> box I have and be done with it?
>
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/



This archive was generated by hypermail 2b29 : Tue Apr 30 2002 - 22:00:15 EST